BETAFPV HD Nano FPV Camera

BETAFPV HD Nano FPV Camera

Product description

BETAFPV HD Nano FPV Camera

The BETAFPV Nano HD camera is the lightest HD camera currently on the market! Customized for Beta65X HD, ultra-definition with 1080p resolution, super light weight at 6.8g, full features with OSD, audio and recording. It also features 1/2.7-inch CMOS sensor and 1.8mm lens for excellent latency. Best choice for all whoop drones like Beta65X / Beta75X / Beta85X. Discover the beauty of the world and record the wonderful life!

Features

• Tiny and lightweight design suitable for weight sensitive drones, weighs only 6.8g. It gives you the opportunity to upgrade your drone to experience super clear visual pleasure.
• Global WDR camera, convenient operation with switchable TV system and Aspect Rdito via OSD, it can capture a clear dynamic image even in low light conditions.
• 1.8mm lens, FOV 170° beyond wide angle for capturing wider and more beautiful scenes.
• The package comes with a Nano HD canopy, this canopy is injection molded, durable and flexible, which is the best combination with Nano HD camera.
• The package comes with an extra canopy for this Betafpv HD camera, so you can replace it when you need to change the canopy.

Technical Specifications

• Betafpv Nano HD Camera
• Image sensor: 1/2.7" CMOS sensor
• Resolution: 800TVL
• Video resolution: 1080P at 60fps / 1080P at 30fps
• TV system: NTSC / PAL (switchable via OSD)
• Aspect Radito: 16 : 9 / 4 : 3 (switchable via OSD)
• Lens: 1.8 mm lens
• Recording field of view: 170 ° C
• Video file: MP4
• Max micro sd card supported: 64G
• Audio: Support
• Mini illumination: 0.01LUX
• DNR: 3DNR
• WDR: Yes
• OSD menu: Yes
• Color: Black
• Power consumption: DC 5-20V
• Working current: 160mA @ 12V
• Net weight: 6.71 grams
• Dimension: 14 * 14 mm (25 mm mounting holes)
• Video Resolution
• Check how clear the picture is!!! With the high resolution of 1080p, you will have a pretty clear picture. The picture quality is super great even in a dim, bright environment.

Diagram for DVR card
As usual, we use the 5V, GND and CAM pads for most functions. If you want to change the configuration of the camera, some modifications are required. Remove the 6-pin black connector and use the ADC pad.

What is the function of the ADC pad? You can control the FPV camera via your wireless transmitter, e.g. change the configuration of the camera's OSD menu, start/stop recording, etc.

Note: Learn more about FPV camera control (joystick emulation).

You need to configure your FC before you can use this feature. Use the connection diagram with BETAFPV 1-2S FC (SPI Frsky version) for example. First check the connection diagram below, the ADC pad is connected to the LED pad on the FC board. So you need to enter the CLI commands through Betaflight Configuration.

Resource LED_STRIP 1 NONE
Resource CAMERA_CONTROL 1 A00
set camera_control_mode = HARDWARE_PWM
set camera_control_voltage = 330
set camera_control_button_delay = 200
set camera_control_internal_resistance = 99
set camera_control_button_resistance = 125,110,90,75,20
set camera_control_inverted = OFF

Note: If you are using a different pad on the FC card for this function, you should change the port in the CLI.

If the configuration works correctly, you can access the Nano HD camera OSD using the joystick gesture below.

Content

• Beta Nano HD Camera
• Nano HD Canopy
• Camera mounting
• Screws M1.2*4