RunCam Split Mini FPV Camera

RunCam Split Mini FPV Camera

Product description

The RunCam Split Mini 2 is a smaller version of the popular RunCam Split V2 and can be used as a live FPV camera as well as a 1080P 60FPS HD recorder. With the RunCam Split Mini2 you can even record on a micro-sized drone in Full HD!

The RunCam Split has a small delay of ~ 35 ms for the video output. So please watch some online review videos to make sure that it works for your intended use. For long range wings / quads the delay shouldn't be too much of a problem, but for FPV racers the delay may be too much if you are not used to it.

Technical data:

• Recording - Field of view (FOV): 165 ° - FPV field of view: 165 ° at 16: 9 and 130 ° at 4: 3
• Video resolution: 1080 @ 60fps / 1080 @ 30fps / 720 @ 60fps
• Video file format: MOV
• Image resolution: 2 MP
• TV mode: NTSC (720 * 480) / PAL (720 * 576) Switchable
• Interface: Micro USB / UART
• Max Micro SD card supports: 64G (Class 6 or higher required, Class 10 / UHS-I / UHS-II / UHS-III recommended)
• Hole spacing of the installation: 20 x 20mm
• Dimensions: Printed circuit board 29 x 29mm / lens module 19 x 19mm
• Power consumption: DC 5-20V
• Working current: 650mA at 5V / 270mA at 12V
• Weight: 12,5 g

Features:

• 1080P / 60fps HD recording and WDR FPV camera
• Power off protection for video files
• Ultralight (12,5 g)
• TV-OUT with low latency (40 ms)
• Wide voltage (5-20V)
• Anti-drop SD card

Scope of delivery:

• 1 x RunCam Split Mini 2 FPV camera
• 1 x metal cover
• 1 x Micro-to-full-size bracket
• 1 x set of M2 screws
• 1 x 3PIN 1.25 JST silicone cable (female)
• 1 x 3PIN 1.25 JST silicone cable (male)
• 1 x 3PIN 1.0 JST silicone cable
• 1 x manual