BETAFPV Charger BT2.0 1S

BETAFPV Charger BT2.0 1S

Product description

BETAFPV Charger BT2.0 1S

The compact, versatile and powerful battery charger is one of the most popular tools for FPV pilots. This charger board is specially designed for BT2.0 connecting batteries and charges up to 6 batteries safely and easily at the same time.

Special Features

• Allows simultaneous charging of 6 BT2.0 ports 1S Lipos, individual charging per port, not parallel
• You can also use an XT60 adapter or a 3s/4s battery (XT60 input) as power supply, so you can charge on the go
• Switches itself off when the supply battery reaches a safe low voltage. 2 channels BEC for supply current
• LED lights indicate when each battery is charged

Note

If you use the battery with the XT60 connector and a 3S or 4S Lipo, please switch to the appropriate input voltage by pressing the corresponding button. 3S battery 3S button, 4S battery 4S button. If you do not switch to the appropriate button, charging is not possible. The power supply unit can select any setting for the input voltage.

Technical data

• Weight: 36,86g
• Dimensions: 75x42x22mm
• Input Voltage: 3S - 4S selectable
• Switch-off voltage: 10.8 V (3S), 14.4 V (4S)
• Output: Fixed at about 400 milliamps
• 4.35 V cell charge cut-off for lipo-battery (+- 0.5% margin of error)
• Optional AC wall adapter

Content

• BT2.0 connector 1S Lipo charger board