BETAFPV Copter HX115 HD FrSky LBT

BETAFPV Copter HX115 HD FrSky LBT

Product description

BETAFPV Copter HX115 HD FrSky LBT

BetaFpv HX115 HD 3-4S Freestyle Ripper. It features a tooth pick F4 2-4S AIO FC paired with a 1105 5000KV motor that allows you to experience the unparalleled boost of performance. For those of you who want to cruise in the backyard or shoot through the sky, this is the part for you.

The Beta HX115 comes in two versions. If you prefer to enjoy HD video recording with this 115mm small FPV copter, the HD version is the best choice. If you just want to experience freestyle with ultimate speed, please choose the FPV version. The FPV version is a few grams lighter and has a Caddx Kangaroo on board.

The BetaFPV drone HX115 HD comes with the Caddx Baby Turtle, which allows you to record in FullHD. With the features of TV-OUT (40MS) with low latency and 1080P/60fps HD recording, it offers you an unforgettable FPV flying experience.The first carbon fiber series with Betafpv Toothpick 12A 2-4S AIO Flight Controller. Weight and size are reduced otherwise there is no need for tedious work like soldering and wiring. Durable and shapely with minimal weight due to 4.2mm thick carbon fiber single bottom frame.
The Tiny Whoop Copter HX115 is equipped with a 1105 5000KV motor and offers unparalleled execution in thrust and control. It supports a 3-4S battery. It has plenty of power and punch to do all the tricks and flips you want. Our recommended configuration is: 3030 props with 450mAh 3S battery or 3020 props with 450mAh 4S battery.

Technical Data

• Weight: 74.3g (without battery)
• FC&ESC：Toothpick F4 2-4S AIO FC
• Motors: 1105 5000KV brushless motors
• Propeller: HQ 3020 2-blade propeller / HQ 3030 3-blade propeller
• Camera: Caddx Baby Turtle
• VTX: A01 25-200mW 5.8G VTX
• Frame: HX115 T700 carbon fiber frame
• Canopy for HX115
• Receiver option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky / TBS Crossfire
• Battery: 450mAh 4S battery / 450mAh 3S battery (not included)
• Flight time: Almost 5 minutes in a smooth flight

tooth pick F4 2-4S AIO Flight Controller
The first carbon fiber drone series that has a new all-in-one layout with Toothpick FC pre-installed. It features a powerful STM32F411CEU processor tuned to Betaflight MATEKF411 (MK41), which offers much more performance at 2-4S.

Specifications of the camera

• Weight: 10.5g
• 1080P/60fps HD recording & WDR FPV camera
• Wide voltage range (5-20V)
• FPV aspect ratio 16:9/4:3 switchable
• TV mode: NTSC (720*480)/PAL (720*576) switchable

Specifications VTX

• The A01 VTX board is lighter and perfect for switchable output.
• SmartAudio is available as standard for the VTX remote control.
• Output power: 25mW (adjustable)
• Smart Audio function is included for radio control.
• Frequency: 5.8 GHz 6 bands 48 channels, with raceband: 5362~5945MHz
• HX115 T700 Carbon Fiber Frame

The new structural design, R0.5 bevel and 4.2mm thickness make the HX115 T700 Carbon Unibody frame the ultimate in durability and aesthetics with minimal weight. An improved T700 carbon fiber material has been used, which has a higher crash resistance compared to the original T300 frame.

Recommended battery and propeller
450mAh 3S and 4S
3030 3 blade and 3020 2 blade propeller

Note: We do NOT recommend using 3030 3 blade propeller with the 4s battery as it may burn your motor due to increased amp draw.

Contents
1 * HX115 115mm HD
1 * HQ 3030 3 blade propeller (4 pcs)
1 * HQ 3020 2 blade propeller (4 pcs)
1 * Caddx OSD card and cable
1 * Set of M2 screws
*The battery is NOT included.