BetaFPV Lipo BT2-0 300mAh 1S 30C HV 1 piece

The article is no longer available.

1 review

4,50 € *

Mehr über das Produkt Question regarding the article?

BetaFPV Lipo BT2-0 300mAh 1S 30C HV 1 piece

Product description

BetaFPV Lipo BT2-0 300mAh 1S 30C HV 1 piece

BT2.0 connector - the most significant revolution in the 1S Tiny Whoop drone segment. Due to many requests from FPV pilots we have rethought the pin solution. We have designed the BT 2.0 connectors with great attention to detail. Betafpv continues to move forward with a passion for groundbreaking experiences.
Now is finally ready. The BT2.0 connectors 1S, exclusively developed by Betafpv, are here.

Features
The BT2.0 connector effectively reduced the internal resistance of the connector by upgrading the crimped pins to 1.0 mm banana plugs and increasing the cross-sectional area of the 1.0 mm banana plug.
The BT2.0 300mAh 1S 30C battery supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. By solving
the problem of voltage drop, the discharge of the 300mAh 1S BT2.0 Lipo becomes more efficient. Pilots can enjoy more flight time without interfering with the low voltage warning. Compared to
the crimped PH2.0 pins, the BT2.0 connector is more durable, can discharge more current at the same capacity and offers significantly more performance. You can fly 2 minutes at full throttle with for example the Meteor65.

Technical Data
Item: 1S Battery
Capacity: 300mAh Rating
: 30C/60C
Voltage: 4,35V Dimensions
: 67.3*11.8*6.1mm
Connection: Betafpv BT2.0 connector
Weight: 7.59g(1pc.) BT2.0

connector There
is a comparison graph between BT2.0 connector and PH2.0 connector (version with fixed pins) in the BETAFPV 1S 300mAh battery. The discharge current for this test is 9A. It could be seen that there is a double time (about 2 minutes) and an improvement of the voltage drop of 0.2 V with the BT2.0 connector.

Difference between BT2.0 Battery and PH2.0 Battery
As we can see, the BT2.0 300mah 1S battery is delivered with the 1.0mm banana plug, while the PH2.0 battery is the one with the crimped pins. It is also slightly longer than the original PH2.0 battery, which is marked BT2.0 on the label.