Emax Wyvern Link Alpha 800mW VTX OpenIPC FPV Video Transmitter with Aluminum Case

Emax Wyvern Link Alpha 800mW VTX OpenIPC FPV Video Transmitter with Aluminum Case

Product description

The EMAX Wyvern Link Alpha 800mW VTX is no ordinary video transmitter - it is a small, highly specialized communication system for your drone. While classic analog systems basically deliver "noise with a picture", this VTX is already clearly moving into the digital space: HD transmission, low latency and full control over your signal.

At its core, the system works with the OpenIPC platform, an open firmware that offers you maximum customizability. This means that you are not dependent on rigid manufacturer ecosystems, but can flexibly optimize your setup - like an FPV pilot with an engineer's urge.

The built-in Sony IMX415 sensor delivers razor-sharp images even in difficult lighting conditions. Combined with up to 1080p at 90fps or 720p at 120fps, the result is a smooth, responsive FPV experience - crucial for racing, freestyle or precise long-range flying.

With a transmission power of up to 800 mW, the Wyvern Link Alpha ensures a strong, stable signal even at long distances. At the same time, the integrated active cooling system with fan prevents your system from thermal collapse during longer flights or standstill operation - a classic problem of many digital VTX systems.

The robust aluminum housing reliably protects the sensitive technology from impacts and makes the VTX ideal for high-performance builds from 5 inches upwards.

A device like this is a great example: FPV is no longer just "flying" - it's signal technology, physics and a bit of controlled chaos in the air.

Technical data

• Product: EMAX Wyvern Link Alpha VTX
• System: OpenIPC (open-source HD FPV platform)
• Output power: up to 800 mW
• Resolution
  • 1920 × 1080 (Full HD)
  • 1280 × 720 (HD)
• Frame rate
  • up to 90 fps (1080p)
  • up to 120 fps (720p)
• Camera sensor: Sony IMX415
• Camera format: 19 × 19 mm
• Hole spacing: 20 × 20 mm / 25.5 × 25.5 mm
• Input voltage: 2-6S LiPo
• Cooling: Active cooling system with integrated fan
• Housing: Aluminum (shockproof & durable)
• Configuration: USB-C & Ethernet (with adapter)
• Weight: approx. 48.2 g (incl. camera, without antenna cable)
• Compatibility: Optimized for FPV drones from 5 inches