GEPRC Crocodile75 V3 Analog Long Range FPV PNP

GEPRC Crocodile75 V3 Analog Long Range FPV PNP

Product description

GEPRC Crocodile75 V3 Analog Long Range FPV PNP

Throughout the journey, the GEPRC team has continued to push boundaries and innovate in the world of long range FPV. Now, with the Crocodile75 V3, we are officially re-setting the benchmark for long range flight. This high-performance drone features a revolutionary design that strengthens the overall structure and effectively reduces vibration for an even smoother and more stable flying experience.

The battery connector is integrated into the fuselage for ease of use. The performance is optimized by the SPAN G50A BLHeli_32 4IN1 ESC and 2806.5 1350KV motor, which provides enough power. In terms of in-flight energy consumption, the Crocodile75 V3 saves energy and increases efficiency.

The whole power spectrum of Crocodile75 V3 has been carefully and strictly tuned by GEPRC team to provide the most passionate flying experience for pilots.

Features

1. Innovative design with reinforced fuselage structure to reduce the impact of fuselage vibration on gyroscope data acquisition.
2. Equipped with SPEEDX2 2806.5 1350KV motor and HQ7.5×3.7×3 propellers for sufficient power and high efficiency.
3. Upgrade to SPAN G50A BLHeli_32 4IN1 ESC.
4. Adding side protection panels to effectively protect the electronic control system from instability caused by sand and dust pollution.
5. The integrated design of the battery connector and fuselage simplifies power-up and adds simplicity and aesthetics to the product.
6. The Crocodile75 V3 features a longer fuselage and can be equipped with Lipo 6S 3300mAh-4500mAh or Lion 6S 6000mAh batteries for flight.
7. Perfectly suited for 7-inch or 7.5-inch propellers.

Technical Data

• Model: Crocodile75 V3
• Analog frame: GEP-LC75 V3
• Wheelbase: 342 mm
• Upper plate: 2,5 mm
• Lower plate: 3,0 mm
• Arm plate: 6.0 mm
• Split pin plate: 2,5 mm
• FC: SPAN F722-BT-HD V2
• ESC: SPAN G50A BLHeli_32 4IN1
• MCU: STM32F722RET6
• Gyro: ICM 42688-P
• OSD: Betaflight OSD with AT7456E chip
• VTX: GEPRC RAD 5.8G 1.6W
• Camera: Caddx Ratel2
• GPS: GEP-M8U
• Antenna: Momoda 5,8G RHCP SMA
• Motor: SPEEDX2 2806.5 1350KV
• Propeller: HQProp7.5×3.7×3
• Weight: 597.5g
• Receiver: PNP
• Recommended battery: Lipo 6S 2600mAh-4200mAh / Lion 6S 6000mAh Flight time: 12-30 minutes

Scope of delivery

• 1 x Crocodile75 V3 Analog
• 4 x HQProp7.5×3.7×3 propellers
• 2 x M20*250mm battery straps
• 2 x battery silicone pads
• 1 x Set of screws
• 1 x L-shaped screwdriver (1.5mm)
• 1 x L-shaped screwdriver (2 mm)
• 1 x L-shaped screwdriver (3 mm)
• 1 x M5 wrench
• 1 x key ring 1 x GP camera base