Matek BetaFlight FC F722 SE Flight Controller

Matek BetaFlight FC F722 SE Flight Controller

Product description

Matek stands for quality and with this FC you get exactly that! The Matek FC with F7 processor is a flight controller in a class of its own. The flight controller shines especially with its quality of workmanship.

FC Specifications

• MCU: 216MHz STM32F722RET6
• IMU: MPU6000 & ICM20602, built-in dual gyros (SPI)
• Baro: BMP280 (I2C)
• OSD: AT7456E (SPI)
• Black box: MicroSD card slot (SPI)
• 5x Uarts (1,2,3,4,6) with build-in inversion
• 1x Softserial Support
• 8x Dshot/Proshot/oneshot output
• 1x I2C
• 4x RX6 pad(one per corner) for BLheli32 ESC controller telemetry
• 4x individual controls power/signal pads
• 1x group of G/S1/S2/S3/S4 pads for 4in1 ESC signal/GND
• 3x LEDs for FC STATUS (blue, green) and 3.3V indicator (red)
• Filtered Vbat output power for VTX, on and off via AUX (modes tab-user1)
• Dual camera image changeable via AUX (modes tab-user2)
• Camera control: Yes
• Smartaudio & Tramp VTX protocol: YES
• WS2812 Led Strip : YES
• Beeper : YES
• RSSI: YES
• Additional ADC for INAV analog airspeed sensor

PDB specification

• Input: 6~36V (3~8S LiPo) with TVS protection
• PDB: 4x35A (Max.4x46A)
• BEC: 5V 2A cont. (Max.3A)
• LDO 3.3V: Max.200mA
• Current Sensor 184A (Scale 179)
• Battery voltage sensor: 1:10
• FC Firmware
• BetaFlight / INAV
• Target: MATEKF722SE

Measurements:

• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
• Size: 36 x 46 mm
• Weight: 10g

Scope of delivery:

• 1x FC F722-SE
• 6x silicon grommets M4 to M3
• 1x FR4 PCB Plate 36*36*1mm
• 1x Rubycon ZLH 35V/470uF (Low ESR)