Matek Mini F7 Flight Controller FC OSD BlackBox 2 Gyros 20x20mm

Matek Mini F7 Flight Controller FC OSD BlackBox 2 Gyros 20x20mm

Product description

Technical data:

• MCU: 216 MHz STM32F722RET6
• IMU: MPU6000 & ICM20602, Dual Gyros built in (SPI)
• OSD: AT7456E (SPI)
• Black box: 32 MB flash memory (SPI)
• Baro: No barometer installed. Support of the external barometer module (I2C)
• 5 x Uarts (1,2,3,4,6) with built-in inversion
• 1 x Softserial supported
• 8 x Dshot / Proshot / Oneshot outputs
• 1 x I2C
• 1 x SH1.0_8-pin plug (Vbat / G / Curr / R6 / S1 / S2 / S3 / S4)
• 3 x LEDs for FC STATUS (blue, green) and 3.3V display (red)

• Vbat filtered output power for VTX, switchable via AUX (tab-user1 modes)
• Dual camera image switchable via AUX (tab-user2 modes)
• Cabrio 20mm on 30,5mm mounting

• Camera control: Yes
• Smartaudio & Tramp VTX protocol: Yes
• WS2812 LED strips: Yes
• Beeper: Yes
• RSSI: Yes
• Additional ADC for analog INAV airspeed

Power:

• Input: 6 ~ 36 V (2 ~ 8 S LiPo)
• BEC: 5V 2A continued (Max.3A)
• LDO 3.3 V: max. 200 mA
• Battery voltage sensor: 1:10 (scale 110)
• No current sensor installed, supports external current sensor from PDB / 4in1
• FC Firmware
• BetaFlight Legacy Destination: MATEKF722SE
• Unified BetaFlight target: MATEKF722mini (MTKS)
• INAV target: MATEKF722mini

Dimensions: mounting 20
x 20 mm
/ F3 mm with silicone grommets 20 x 20 mm / F2
mm with silicone and brass eyelets 30.5 x 30.5 mm / F3
mm with conversion plate and silicone grommets Dimensions: 28 x 28
mm Weight: 5g

Scope of delivery:

• 1 x FC F722-mini
• 1 x 20mm to 30.5mm conversion plate
• 6 x silicone eyes M4 to M3
• 6 x brass eyelets M3 to M2
• 1 x SH1.0_8pin cable 5cm
• 2 x SH1.0_8pin connector