- 109,90 € *
You might like these alternative articles
TrueRC X2-Air MK II 5.8 FPV Antenna for DJI FPV RHCP
Product description
TrueRC X2-Air MK II 5.8 FPV Antenna for DJI FPV LHCP
More gain and more comfort! This is the adaptation of the almighty X²-AIR into a smooth low profile face mount for DJI Goggles. Just peel off the included adhesive, stick it on, and put the goggles in your pocket - ready for a day of flying. Enhanced 13 dBic gain and huge 180 degree combined beamwidth provide an amazing flying experience in the most challenging conditions.
Dual elements array provide 13Dbi circularly polarized beam of 75deg
Combining the two elements into a single feed increases gain and extends horizontal range while sacrificing vertical range, which is not used much in FPV.
Low profile design, only 15mm thick
Most compact antennas at this gain level are only 15mm thick, so you can leave them on your goggles all the time without fear of breaking them. The included double-sided foam tape provides a solid connection to the faceplate of your glasses and installs in minutes.
Custom RP-SMA connectors that perfectly fit DJI FPV goggles
Like all other components of the X²-AIR antennas, the custom RP-SMA connector is manufactured to the highest standards to perfectly fit your goggles and ensure every bit of RF power is transmitted from the X²-AIR. A knurled surface makes for easy tightening and a premium look only available from TrueRC.
Features
- Circular polarized
- Sector shaped beam (widest in the horizontal)
- Attaches directly to DJI faceplate with included adhesive surface
- Compact, low-profile design on goggles, easy to store and transport
- High 13 dBic for unmatched range and signal penetration
- Wide SWR and axis ratio bandwidth, works outside 5.8GHz band as well
- Super-wide 150-degree beam for each antenna, combines to 180-degree beamwidth
- Special knurled RP-SMA connectors
Specifications
- Bandwidth: 5.1GHz-7.0GHz
- Gain: 13 dBic
- Polarization: RHCP
- Beamwidth Horizontal*: 150deg
- Beamwidth Vertical*: 62deg
- Beam @-3dB**: 75deg.
- Vertical beam @-3dB**: 34deg
- Connector: Custom knurled RP-SMA
- Dimensions: 72mm x 34mm x 15mm
- Weight: 20g per piece
- Includes adhesive mount for mounting on DJI FPV goggles
Contents
- X²-air MKII antennas (one for each side)
| Order number | TRU-X2-AIR-DJI-RHCP |
|---|---|
| EAN | 0608597253818 |
| Manufacturer | TrueRC |
| Produktsicherheit | Hersteller: TrueRC Canada inc 13 rue Caron, Rouyn-Noranda, Qc, J9Y1T6, Canada E-Mail: support@truerc.com Verantwortliche Person: meilon GmbH Konrad Zuse Ring 31 53424 Remagen Deutschland E-Mail: support@meilon.de Tel.: +49 (0)2642 / 40 52 88 0 |
will be bought with
-
CNHL Black Series Lipo battery 1100mAh 22.2V 6S 100C XT60
22,90 € * -
CNHL LiPo battery Black Series 1300mAh 22.2V 130C 6S XT60 Plug V2.0
28,90 € * -
CNHL Black Series Lipo battery 1500mAh 14.8V 4S 130C XT60
20,90 € * -
HGLRC KRATOS Fireproof Lipo Bag
11,50 € * -
ToolkitRC XT60 to XT30 adapter
3,50 € * -
Tattu R-Line 850mAh 4S 95C 14.8V Lipo battery XT60
20,90 € * -
Tattu R-Line Version 6.0 1300mAh 22.2V 160C 6S1P Lipo battery XT60U-F Plug
36,90 € *





