BetaFPV Matrix 1S Flight Controller 5-in-1 V2 AIO ELRS Solder-Free

BetaFPV Matrix 1S Flight Controller 5-in-1 V2 AIO ELRS Solder-Free

Product description

Solderless Version

The “Matrix 1S 5IN1 II” flight controller is the next generation of flight controllers, designed for pilots who refuse to compromise. Building on the proven all-in-one design, it offers a significant leap forward in both performance and durability. Experience the raw power of a 12-A continuous-current ESC, the crash-proof reliability of the 3-point mounting system, and the flexibility in assembly thanks to plug-and-play or DIY versions. This is the rugged, high-performance heart of your most demanding 1S Whoop builds.

Features

• All-in-One Integration: Combines the FC, ESC, OSD, serial ELRS 2.4 GHz receiver, and a 5.8 GHz 400 mW VTX into a single, compact unit.
• Enhanced ESC with 12 A continuous current: Delivers 12 A continuous current (18 A peak current) for powerful propulsion.
• Enhanced Durability: Features a robust 3-point mounting system and a 1.0 mm thick circuit board to absorb impact forces during crashes and protect the core components.
• Advanced Core Components: Powered by a high-performance G473 processor for precise racing and complex freestyle maneuvers.
• Optimized Layout: An optimized component layout improves durability and overall reliability.

Specifications

FC

• MCU: STM32G473CEU6
• Gyroscope: ICM42688P / ICM42622 / BMI270 / LSM6DSK320X
• Black box memory: 16 MB
• Sensors: Voltage and current
• BEC: 5 V, max. 3 A
• UART: UART 1, UART 2 (for VTX), UART 3 (for RX), UART 4
• BetaFlight OSD: AT7456E
• ESC: 12 A continuous current
• RX: Serial ELRS 2.4 GHz (V3.4.3)
• VTX: 5.8 GHz, 48 channels, max. 400 mW
• FC Firmware: Betaflight_4.5.3_BETAFPVG473_V2
• USB connector: SH1.0 4-pin
• Motor connector: JST1.25
• Battery connector: BT2.0
• Mounting hole spacing: 26 mm x 26 mm
• Weight: 4.1 ± 0.1 g (solderless)

ESC

• Current input: 1S only
• Current: 12 A continuous, 18 A peak
• ESC firmware: A_X_5_96KHz_V0.19.hex for BB51 Bluejay firmware
• Digital signal protocol: DShot300, DShot600

VTX

• Output power: 25/100/200/400/PIT
• Frequency: 5.8 GHz, 48 channels, with Raceband: 5658–5917 MHz
• Channel selection: SmartAudio 2.0
• Modulation type: FM
• Frequency control: PLL
• Total harmonics: max. -50 dBm
• Frequency stability: ±100 kHz (typ.)
• Frequency accuracy: ±200 kHz (typ.)
• Channel carrier error: ±1.5 dB
• Antenna connection: 50 Ω
• Operating temperature: -10 °C to 80 °C