DarwinFPV Baby Ape Pro V3 Freestyle FPV Drone PNP

DarwinFPV Baby Ape Pro V3 Freestyle FPV Drone PNP

Product description

The Darwin Baby Ape has won the hearts of many pilots since its release. In the pursuit of an even better FPV drone, we have listened to pilot feedback and proudly present the BabyApe Pro V3.

We have made several upgrades to the frame. First, the nylon tension bolt design has been replaced with aluminum alloy tension bolts, which strengthens the frame and stabilizes the structure. Second, we added a mount for the receiver. Thirdly, the arms were upgraded. The single arms (2.5 mm thick) have been replaced by two integrated arms (3.0 mm thick). They are easier to disassemble, stable and durable. Finally, the V2 version requires only 4 screws to attach, and the arm can be replaced by removing 2 screws without removing the entire drone.

Specifications

• CADDX ANT camera

  • Resolution: 1200TVL
  • Image sensor: 1/3" CMOS sensor
  • Input: DC 3.7-18V
  • TV system: PAL/NTSC

• 1104 4300KV 2-3S Brushless Motor

  • KV: 4300KV
  • Lipo cells: 2-3S

• AIO 4 IN 1 15A BLHeli_S ESC

  • Input voltage: 1-3S LiPo
  • Continuous current: 15A
  • Peak current: 17A (10S)
  • BEC output: no
  • Main control chip: EFM8BB21
  • Firmware upgrade: Supports Dshot600/Oneshot125
  • MOS: 3x3

• F411 AIO flight controller

  • Main control chip: STM32F411
  • Integrated OSD
  • PPM/DSM/IBUS/UAR sharing: UART1-RX
  • IMU: MPU6500 (SPI)
  • Mounting hole spacing: 25.5x25.5 mm
  • Supports Betaflight firmware

• Switchable VTX:

  • Supports TBS SmartAudio
  • Transmission power: from 0mW/25mW
  • Channel: 40CH
  • Full video format: NTSC/PAL
  • Input voltage: 7V~24V
  • Power consumption: +12V/600MW
  • Size: 25×20×6 mm
  • Weight: ≤3.2g (without antenna)
  • With copper tube mini antenna (IPEX antenna)

• Receiver: PNP

• Gemfan 3016 3-blade propeller:

  • Mounting hole: 1.5 mm
  • Center thickness: 5.5 mm
  • Quantity: 2 pairs
  • Weight: 1.18 g per pair