Diatone GT R369 SX 3 Inch F7 TBS FOXEER Race Copter Drone

Diatone GT R369 SX 3 Inch F7 TBS FOXEER Race Copter Drone

Product description

Note: Due to the high heat buildup of the STM32F722, leave a gap of at least 5 mm on both sides of the FC to ensure good air circulation.

Universal receiver connector Standard - Frsky R-XSR JST1.25, XM +

Diagram link Via the link in the Help Center

Diatone 2019 GT R369 SX 3 Inch Crazy Racing Edition

Receiver connector - Frsky R-XSR JST1.25

Specification:

• Brand Name: Diatone
• Product Name: 2019 GT-Rabbit R369
• Color: transparent

FC specifications

• MCU: 216 MHz STM32F722RET6 32BIT
• IMU: MPU6000
• Baro: No.
• OSD: BF-OSD
• Blacbox: 16M flash memory
• Uarts: 6Set
• ESC Soft: Dshot300 / 600/1200
• ESC telemetry: RX2
• LED: Blue & Orange for FC Status ,, White 5V, Red 3.3V
• Input: 2 ~ 6 S Lipo (8,4 ~ 25 V) 450-650 mah
• VTS protection: Yes
• BEC: 5V 2A (max 3A)

• Camera: FOXEER Predator V4
• Antenna: TBS
• VTX: TBS UNIFY 800 mW max
• Engine: MAMBA Racing MB1408 2800KV
• LED board: Switchable Sw2812

ESC Specifications

• INPUT VOLTAGE: 2 ~ 6S Lipo (7,4V ~ 25V)
• CONTINUATION OF THE CURRENT: 30 A × 4
• Explosion current: 35A (10S)
• BEC: NO SOFT: Dshot300 / 600/1200
• ASSEMBLY: 20mm / M2
• Supply: Panasonic high frequency 470uF / 35V