FrSky Tandem TD-R6 Receiver 2.4 GHz 868 MHz

FrSky Tandem TD-R6 Receiver 2.4 GHz 868 MHz

Product description

FrSky Tandem TD-R6 Receiver 2.4GHz 868MHz

The Tandem dual band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they operate simultaneously on both 2.4Ghz and 900Mhz frequencies. This means that the Tandem receivers not only offer low latency and long-range control, but also provide a higher level of reliability and anti-interference performance.

The Tandem series receivers feature a dual-band antenna design (2.4GHz & 900MHz) that provides multi-directional, wide coverage for the remote signal. Telemetry data (power and signal related) can be recorded with the black box module built into the Tandem receiver, useful for collecting data on any unusual status during flight.

TD R6 receiver provides 6 PWM channel outputs and is bundled in a compact, lightweight design, the receiver also provides two of 3-pin ports corresponding for SBUS Out and FBUS/S.Port. By setting the S.Port to FBUS protocol, TD receivers open up the possibility of seamless pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.

Features

• Simultaneous operation in 2.4G&900M dual-band TD mode
• Dual-band antenna design for multi-directional coverage
• Compact, lightweight design
• Black box function
• 4ms race mode with telemetry
• Long control range (up to 50KM - 100KM)
• Over-The-Air (OTA) FW updating
• 6 PWM channel ports
• FBUS / S.Port
• SBUS Out (Supports 16CH / 24CH mode)

Technical Specifications

• Frequency: 2.4GHz & 900MHz
• Dimensions: 47.5*20.4*10.9mm (L*W*H)
• Weight: 11.5g
• Operating voltage: 3.5-10V(recommended 3.7-8.4V)
• Operating current: ≤110mA@5V
• Compatibility: TANDEM series radios and RF module in TD mode.
• 2.4G/900M antenna connector: IPEX1
• Voltage measurement range via AIN2 (external device): 0-30V

Content

• 1x FrSky Tandem TD-R6 receiver 2.4 GHz 868 MHz