Vifly ShortSafer V2 Smoke Stopper XT30 XT60

Vifly ShortSafer V2 Smoke Stopper XT30 XT60

Product description

The VIFLY ShortSafer V2 protects your FPV drone’s electronics from damage caused by short circuits and excessive currents when you first connect the battery or after repairs. The Smoke Stopper simply plugs in between the battery and the drone and automatically cuts off the power supply in the event of a fault.

The current limit can be switched between 1 A and 2 A. The device responds within just 3 ms in the event of a short circuit and within 10 ms in the event of an overcurrent. Thanks to the integrated XT30 and XT60 connectors, no additional adapter is required.

The ShortSafer V2 supports 2S to 6S LiPo batteries and is an essential piece of basic equipment for building and maintaining FPV drones.

Product Highlights

• Electronic fuse: Completely cuts off the power supply in the event of a fault, preventing any harmful residual current from flowing.
• Fast Shutdown: Responds to short circuits within approximately 3 ms and to overcurrent within approximately 10 ms.
• XT30 and XT60 Connectors: Genuine Amass connectors are integrated directly onto the circuit board.
• Integrated On/Off Switch: Allows for easy powering on and off, for example, when binding receivers.
• Adjustable current limit: Switchable cut-off threshold of 1 A or 2 A, depending on the requirements of the connected electronics.

Technical Specifications

• Dimensions: 42 × 30 × 10 mm
• Connections: XT30 and XT60 (input and output)
• Current limit: 1 A / 2 A, switchable
• Short-circuit trip time: 3 ms
• Overcurrent trip time: 10 ms
• Input voltage: 7–25 V DC (2–6S)
• Weight: approx. 15 g