GEPRC TAKER F722 35A 32-bit 2–6S AIO Flight Controller

GEPRC TAKER F722 35A 32-bit 2–6S AIO Flight Controller

Product description

The GEPRC TAKER F722 35A 32-bit AIO Flight Controller combines a powerful flight controller and an integrated 35A ESC in a compact all-in-one solution. Equipped with the proven STM32F722 processor, the precise ICM42688-P gyro sensor, and an integrated 32-bit ESC, this AIO board provides the perfect foundation for modern freestyle, racing, and lightweight FPV drones.

Thanks to its support for 2S to 6S LiPo batteries, the TAKER F722 AIO is suitable for both compact freestyle builds and high-performance racing drones. The integrated 16 MB black box memory enables detailed flight analysis and tuning, while the built-in barometer also supports the use of INAV firmware.

A particular highlight is the integrated HD-VTX direct connection. Compatible HD video systems can be connected via the 6-pin connector on the bottom without any complicated soldering work. This significantly simplifies assembly and ensures a clean installation.

With a total of 5 full UART interfaces, Betaflight OSD, buzzer and LED support, and a weight of just 9.3 grams, the GEPRC TAKER F722 AIO offers everything modern FPV pilots need for a powerful and reliable build.

Features

• All-in-One Flight Controller with integrated 35A 32-bit ESC
• Powerful STM32F722 processor
• Precise ICM42688-P SPI gyro sensor
• Integrated barometer for INAV support
• 16 MB black box memory for flight data logging
• Supports 2S to 6S LiPo batteries
• 35A continuous current and 45A burst current
• Direct HD-VTX connection without soldering
• 5 full UART interfaces
• Betaflight OSD with AT7456E chip
• USB Type-C port
• Supports DShot600, Oneshot, and Multishot
• Integrated buzzer and LED connections
• Compact design and lightweight
• Ideal for freestyle, racing, and lightweight builds

Technical Specifications

Flight Controller

• Model: GEPRC TAKER F722 35A 32-bit AIO
• MCU: STM32F722
• Gyro Sensor: ICM42688-P (SPI)
• Firmware Target: GEPRC_F722_AIO
• Blackbox: 16 MB onboard flash
• Barometer: Yes
• OSD: Betaflight OSD with AT7456E
• UARTs:
  • R1 / T1
  • R2 / T2
  • R3 / T3
  • R4 / T4
  • R5 / T5
• USB port: Type-C
• Buzzer: Yes
• LED support: Yes
• BEC output: 5V / 1A

ESC

• Type: Integrated 32-bit ESC
• Continuous current: 35A
• Burst current: 45A (10 seconds)
• Input voltage: 2–6S LiPo
• Supported ESC protocols:
  • DShot600
  • Oneshot
  • Multishot

Dimensions & Weight

• Size: 35 × 33.5 mm
• Mounting spacing: 25.5 × 25.5 mm
• Mounting: M3 rubber dampers on M2 screws
• Weight: 9.3 g