iFlight Beast F7 55A V2 AIO Flight Controller 25.5 x 25.5

iFlight Beast F7 55A V2 AIO Flight Controller 25.5 x 25.5

Product description

iFlight Beast F7 55A V2 AIO Flight Controller 25.5 x 25.5

What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25x25 whop size board? That would be crazy, right? Well, we just did it....

This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to speed up the game and make more room for future flight firmware development like Betaflight, Emuflight, etc. This could only be achieved by using BGA chipsets instead of ordinary QFP MCUs (large dimensions) and ultra-strong mosfets for almost any setup. Solder on your motor wires and you're ready to go! DJI plug and play connectors and so many UARTs that most people wouldn't even use them all. Compatible with digital and analog FPV, onboard barometer for possible long range flights and much more. Unleash the Beast!

FC // Beast F7 AIO

Specification:

MCU: BGA-STM32F745
Gyro: BMI270
Blackbox: 16MB Onboard Flash
BEC Output: 5V 2.5A
Barometer: DPS310
Connector: Micro-USB
OSD: IFLIGHT OSD (AT745E）
FC Firmware：IFLIGHT_F745_AIO_V2
Installation dimension: 25.5*25.5mm φ3mm
Dimensions: 32.5*32.5mm
Weight: 8.5g

ESC // 55A 2-6S

Specification:

Uarts: 5
Current sensor: yes
Input: 2-6S LIPO
Current scale: 100
Constant: 55A / Burst: 60A
BLHeli: BLHeli-S
Telemetry: no
ESC firmware: G-H-30 BLS
Installation dimension: 25.5*25.5mm/Φ3mm
Dimensions: 32.5*32.5mm

Content

- Beast F7 AIO x 1

- Capacitor 470uF/16V x 1

- Capacitor 470uF/35V x 1

- XT60 16AWG cable 100mm x 1

- XT30U 18AWG Cable 70mm x 1

- 14AWG Silicone Cable Red 100mm x 1

- 14AWG Silicone Cable Black 100mm x 1

-1.0-7P Cable 50mm-28mm x 1

-1.0-7P Cable 50mm x 1

- M2 Silicone Bushings x 4

- M2*12mm Screws x 8

- M2 Clear Nylon Nut x 8

- 0.8mm black heat shrink tubing 10mm x 8