iFlight FPV BLITZ F7 V1.1 FC Flight Controller

iFlight FPV BLITZ F7 V1.1 FC Flight Controller

Product description

iFlight FPV BLITZ F7 V1.1 FC Flight Controller

- Improved circuit design, better components and lower electrical noise!

- DJI HD VTX connector (plug-and-play / no soldering required)

- FC indicator LEDs for visual troubleshooting

- With LC filter

Changelog:

- 2022/Feb: Version updated to V1.1

Specifications:

• MCU: STM32 F722
• Gyro: BMI270
• Barometer: DPS310
• OSD chip: AT7456E
• Flash: 32MB (Blackbox-Flash)
• UARTS: 6
• Motor outputs: 4x (SH1.0 connector)
• I2C serial: SDA / SLA connectors
• Smartaudio / IRC Tramp VTX protocol supported
• LED control: Yes
• Beeper pad: Yes
• Firmware target: IFRC-IFLIGHT_BLITZ_F722
• Mounting pattern: 30.5*30.5mm / 4mm PCB hole diameter
• Dimensions: 36.5*35mm
• Weight: 7.8g
• BEC: 5V 2.5A

Wiring suggestion:

- UART 1 for VTX HD / Analog

- UART 2 for a receiver

- UART 3/4/5 for GPS or other sensors that need a serial interface

- UART 6 for ESC telemetry

Contents

• 1 x BLITZ F7 V1.1 flight controller
• 1x SH1.0 - 5pin connector for HD VTX/Analog VTX&CAM (R1/T1/G/9V/VO)
• 1x SH1.0 - 10pin connector for ESC (R6/CUR/M4/M3/M2/M1/BAT/BAT/G/G)
• 1x SH1.0 - 6pin connector for each receiver or DJI（3V3/R2i/5V/G/R2/T2）
• 1x SH1.0 - 4Pin connector GPS (T4/R4/G/5V)
• 1x SH1.0 - 4Pin connector LED & beeper (5V/G/VI/NC)
• 1x set of silicone grommets