Free shipping from 120 €**
Ordered in the morning, shipped immediately!
Fachhändler

iFlight SucceX-D F7 Twing FC & 50A 4in1 ESC Stack

The article is no longer available.
  • 194,90 € *

iFlight SucceX-D F7 Twing FC & 50A 4in1 ESC Stack

Product description

iFlight SucceX-D F7 Twing FC & 50A 4in1 ESC Stack

SucceX-D F7 V2.1 is designed to work seamlessly with DJI's new HD FPV system. To make things even easier, the DJI Air unit can be easily connected to the FC with the included wiring harness. In addition, we've added the popular and reliable USB Type-C instead of Micro-USB, making it the same standard as your DJI module.

Technical data FC

  • MCU: 216MHz STM32F722
  • Gyro: 2x ICM20689
  • Baro: Yes
  • Blackbox: 32MB
  • Betaflight OSD: Yes
  • BEC: 5V 2.5A / 9V 2.5A
  • Current sensor scale: 100
  • Inverter for SBUS input (UART2-RX)
  • Smartaudio & Tramp VTX protocol supported
  • Beeper pad : Yes
  • RSSI input pad: No
  • UARTs:5
  • Motor outputs: 8
  • 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5)
  • 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V)
  • BLHeli32 Telemetry: RX5
  • Input voltage: 2-6S, MAX 8S
  • Firmware Target: IFLIGHT_F722_TWING
  • Drill holes: 30.5x30.5mm 4mm diameter / 3mm with rubber dampers
  • Size: 36x36mm
  • Weight: 7.5g
  • USB type-C

Technical data ESC

  • MCU: STM32F051
  • Up to 48kHz PWM frequency
  • Capacitor: 470uF/50V
  • Voltage sensor: Yes
  • Voltage: 2-6S Lipo
  • Current flow: 50A / Burst: 60A
  • BlHeli32 telemetry: Yes
  • BEC: No
  • Up to Dshot1200, Proshot, Oneshot, Multishot
  • Target: iFlight-BL32-4IN1
  • Weight:14.4g
  • Drill holes: 30.5x30.5mm / 3mm diameter
  • Size: 43x39mm

Content

  • SucceX-D F7 V2.1 TwinG Flight Controller
  • SucceX 50A 4in1
Bestellnummer IFL-FC07569
EAN 4260691170703
Hersteller iFlight

2 Customer opinions

4.50
Apr 2021

TIll

Wenn erst mal alles funktioniert ist der Stack wahnsinn. Sehr gute und vielseitige Möglichkeiten. Auch die Anschlussmöglichkeiten sind immens und gut durchdacht. Was sehr schade ist, ist dass die Gnd.-Pads sehr schlecht verarbeitet sind. An allen Lötpads war das Löten kein Problem. Die Gnd.-Pads waren eine Höllenqual und nach 2 Stunden habe ich dann 3 Gnd.-Kabel an einen Gnd.-Punkt angelötet. Ich weiß nicht an was es lag, aber für den Preis finde ich das schon so naja. Ansonsten läuft Betafligth mega auf dem Stack. Wäre da nicht dieses eine Problem, wäre es ein Traum.

Nov 2021

Wölk

Sehr gute Kombo in Verbindung mit DJI AIR - Unit + Caddx Polar Cam in meinem RoboCat 280 !!!!!! Faire Preise und gute Beratung wenn es mal schwierig wird!!!!!

Der FPV24 Newsletter. Kein Nonsens. Maximal einmal im Monat. In Deinem Postfach.

Rabatte, Angebote, News und neue Produkte. Jetzt kostenlos für den FPV Newsletter anmelden.

Shopping Cart