ItsFPV ERA 5-Inch DJI O4 Frame Kit Freestyle Black

ItsFPV ERA 5-Inch DJI O4 Frame Kit Freestyle Black

Product description

The ItsFPV ERA 5-inch DJI O4 Frame Kit Freestyle Black is a high-quality carbon frame for high-performance 5-inch FPV freestyle drones. With its robust T700/T800 carbon construction, compact Compressed-X geometry, and black nylon camera cage, the frame kit provides a stable foundation for demanding FPV builds.

The DJI O4 version was specifically designed for the DJI O4 Pro camera with its original plastic housing. Reinforced carbon arms, shock-absorbing protective elements, and a maintenance-friendly design make the ERA 5 a durable solution for freestyle pilots.

Robust Carbon Frame for FPV Freestyle

The ERA 5 combines 6 mm-thick T700 carbon arms with T800 bottom plates and a T700 top plate. The form-fit arms and two-piece frame design ensure high rigidity and allow for quick replacement of damaged components.

The Compressed-X geometry with a 225 mm wheelbase concentrates mass close to the center of gravity and supports direct, agile flight behavior.

DJI O4 Pro Nylon Camera Guard

The black freestyle camera cage, made of injection-molded nylon, was specifically designed for the larger DJI O4 Pro camera. The material absorbs impact energy and protects the camera during hard landings and crashes.

The FPV camera angle can be adjusted between 0° and approximately 40°, independently of an optional action camera. The extended front carbon fiber base plate is tailored to the dimensions of the O4 camera cage.

Well-thought-out design and flexible mounting

The frame supports flight controller stacks with 30.5 × 30.5 mm or 20 × 20 mm hole spacing, as well as VTX mounts with 20 × 20 mm and 25.5 × 25.5 mm spacing.

Integrated motor cable protectors, nylon landing skids, and a non-slip LiPo pad protect critical components. Two nylon-Kevlar battery straps secure the flight battery. Optionally available action camera mounts allow for additional footage.

Features

• 5-inch FPV freestyle frame in black
• Designed specifically for the DJI O4 Pro with original camera housing
• High-quality T700/T800 carbon fiber construction
• 6 mm thick carbon arms
• Compressed-X geometry with 225 mm wheelbase
• Black freestyle camera cage made of injection-molded nylon
• Shock-absorbing camera protection
• Adjustable FPV camera angle from 0° to approx. 40°
• Reinforced, form-fit arms
• Quick arm replacement with just one screw
• Maintenance-friendly frame design
• Hardened YFS screws, strength class 12.9
• Spacers made of 7075 aluminum
• Support for 5-inch and up to 5.2-inch propellers
• Nylon landing skids and motor cable protectors
• Includes LiPo pad and nylon-Kevlar battery straps

Technical Specifications

General

• Manufacturer: ItsFPV
• Model: ERA 5″ Frame Kit O4
• Variant: Freestyle Black
• Product Type: FPV Drone Frame / Frame Kit
• Propeller size: Up to 5.2 inches
• Axle spacing: 225 mm
• Frame Geometry: Compressed X
• Camera Cage Color: Black
• Application: FPV Freestyle

Material & Construction

• Frame material: T700/T800 carbon
• Arm Thickness: 6 mm T700 Carbon
• Front base plate: 2.5 mm T800 carbon
• Rear bottom plate: 2 mm T800 carbon
• Top plate: 2 mm T700 carbon
• Camera cage: Injection-molded nylon
• Spacers: 7075 aluminum
• Screws: Hardened steel, strength class 12.9
• Spacer height: 20 mm

Installation & Compatibility

• Flight controller mounting: 30.5 × 30.5 mm / 20 × 20 mm
• Motor Mounting: 16 × 16 mm
• VTX Mounting: 20 × 20 mm / 25.5 × 25.5 mm
• Camera compatibility: DJI O4 Pro with original plastic housing
• FPV Camera Angle: 0° to approx. 40°
• Action camera angle: 20° by default, optionally 10°–30° with compatible mounts

DJI Air Unit, antenna, and motors not included