Jumper T18 Pro Remote Control JP5in1 Module Carbon

Jumper T18 Pro Remote Control JP5in1 Module Carbon

Product description

Jumper T18 Pro Remote Control JP5in1 Module Carbon

The Jumper T18 brings the best features of the T16 series and has upgraded the JP4IN1 module to JP5IN1. An RC transmitter that can do a lot more.

Innovation never stops at Jumper RC.
Jumper RC remote controls with a focus on providing hardware that is compatible with various open source projects. We are constantly working to release better products.Looking for aRC remote control that can control long ranges? Don't want to connect an add-on module to the transmitter? Then the Jumper T18 is just what you need. The Jumper T18 has a JP5IN1 multi - protocol module, with 2.4G JP4IN1 and 915mhz / 868mhz at the same time.
With the T18 you can control your mini quads and airplanes at the same time without attaching an extra module.

What is the difference?
In addition to JP5IN1, the Jumper T18 has newly added adjustable LED backlights. Two power buttons ensure you can turn off the transmitter quickly enough. Smooth gimbal mount for the ALPS RDC90 sensor (T18 Pro only). Adjustable neck strap hook balancer can relieve your neck weight.... And much more.
What else is new with the T18? Check out the technical data and order one.

Technical data

JP5-in-1 multi-protocol module includes R9, DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more
OpenTX firmware

• Voice function
• Zipper bag included
• Adjustable LED backlight
• Vibration reminder function
• USB-C online firmware update
• JR/FrSKY compatible module slot on the back.
• JP5IN1 module - 2.4G JP4IN1 and 915mhz / 868mhz
• 6 flight mode buttons (for APM and Pixhawk flight controllers)
• Telemetry support (depending on receiver)
• Up to 16 output channels (can be expanded to 32 channels depending on receiver)
• Size: 180*190*58
• Front panel: Carbon
• Gimbal type: ALPS RDC90
• Weight: 888g (without battery)
• Working voltage: DC7-8.4V (NO CRSF)
• Channels: up to 32 channels (depending on the receiver)
• Displays: IPS480*272 (800 * 480 HD IPS touchscreen interface reserved - expected to be supported by openTX2.4 and later)
• Simulator mode: 3.5 mm standard ppm output or USB HID

Contents

• 1 x T18 Pro radio
• 1 x zippered pouch
• 1 x USB-C cable
• 1 x Jumper orange lanyard