Tattu battery Lipo battery 650mAh 3S1 11.1V 75C

Tattu battery Lipo battery 650mAh 3S1 11.1V 75C

Product description

The Tattu 650mAh 3S LiPo battery is designed for small, high-performance FPV racers and multicopters. With a voltage of 11.1V, a discharge rate of 75C, and a weight of just 52 g, it offers high current capacity in a compact package.

Every gram counts, especially with small FPV drones. With dimensions of 58 × 31 × 16 mm, the 3S battery fits even in compact frames. The 650 mAh capacity is ideal for short, dynamic flight sessions where low weight and immediate power delivery are more important than long flight times.

Tattu uses a special cell stacking technology and high-quality lithium-polymer materials from Japan and Korea in its LiPo batteries. This design enables high energy density and current delivery in a compact space. As a result, the battery is well-suited for rapid acceleration, precise flight maneuvers, and demanding FPV racing applications.

The Tattu 650mAh 3S 75C is equipped with an XT30 connector for power supply and a JST-XHR balancer connector. The recommended charging current ranges from 1C to 3C, with a maximum of 5C permitted.

The battery is suitable for compatible micro and mini FPV drones with frame sizes ranging from approximately 90 to 180 mm. Key factors to consider are the supported battery voltage, the required current, the available installation space, and the appropriate connector system.

Technical Specifications

• Product Type: Lithium-polymer battery (LiPo) Capacity: 650 mAh
• Voltage: 11.1 V
• Number of Cells: 3S (3 cells in series)
• Discharge rate: 75C
• Maximum continuous discharge current: calculated at 48.75 A
• Weight: approx. 52 g
• Dimensions (L × W × H): 58 × 31 × 16 mm Discharge connector: XT30
• Balancer connector: JST-XHR
• Recommended charging rate: 1C–3C (0.65–1.95 A)
• Maximum charge rate: 5C (3.25 A)
• Applications: Micro FPV racers, mini quadcopters, and multicopters

Potentially compatible FPV models—Depending on the equipment and powertrain configuration, the battery may be suitable for the following models, among others:

• ImmersionRC Vortex 150 / 180
• DYS Shark-Mako 100
• Diatone GT-R90 FPV
• EMAX Babyhawk-R Race Edition 136 mm
• Kingkong ET115
• Furibee 120
• Eachine Lizard 95

Note: The model list is for reference only. Before use, check the supported 3S voltage, the XT30 connector, the battery dimensions, and the power requirements of the respective model. Use only a suitable LiPo balancer charger for charging.