BETAFPV AIO Brushless Flight Controller 20A F4 2-4S V3 Toothpick

BETAFPV AIO Brushless Flight Controller 20A F4 2-4S V3 Toothpick

Product description

BETAFPV AIO Brushless Flight Controller 20A F4 2-4S V3 Toothpick

The BetaFPV Toothpick AIO FC with 20A and 25A burst is exactly the right board for a Toothpick or small Cinewhoop.

The V3 has all the functions of the V2 board, plus 2 new ones!

New functions of the V3

• 8M Flash chip for Betaflight Black Box
• 3 complete UARTs (UART1, UART2 and UART6) are available in version V3. Pilots can use one UART for the digital DJI FPV Air Unit or DJI FPV Caddx Vista and the other UART for external receivers like TBS Crossfire

Special features

• This new board can handle 20A continuous current (25A burst) and is the first 20A all-in-one FC on the market
• Standard with pluggable 4* motor pins and not pre-soldered, best suited to your self-assembly needs
• Compatible with 120X, 130X, 140X and 1505 engines
• The USB port is mounted on the side, you have more possibilities to mount the AIO board without losing access to the USB port
• All soldering points are located on the edge of the FC, which makes soldering easier
• Double-sided motor solder pad. Pins pad and wires pad are both built in for motor connection
• Integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD, F4 MCU and 20A ESC, supports 2-4S batteries

Technical details FC

• CPU: STM32F411CEU6 (100MHZ)
• Six axes: MPU6000 (SPI connection)
• Size: 32.5*32.5 mm (26.5 mm mounting holes)
• Firmware version: BETAFPVF411 (BEFH)
• OSD: Built-in BetaFlight-OSD (OSD chip: AT7456E)
• Receivers: Support Frsky XM/XM+ receiver/ Futaba receiver/ Flysky receiver/ TBS Crossfire receiver/DSMX receiver
• Supports programmable LED like WS2812 etc.
• Built-in current sensor
• Weight: 6,63g

Technical details ESC

• Support of the BLheli/BLHELI_S-Suite Pass-through ready
• Supports PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Input voltage: 2S-4S Lipo
• Continuous current: 20A
• Burst: 25A
• Firmware: BLHELI_S
• Motor connectors: 1.25mm pin header connectors

Content

• Toothpick F4 20A AIO 2-4S brushless FC
• Cable Pigtail (XT30)
• 4 x M2x10mm screws
• 4 x M2 nuts
• 4 x anti-vibration rubber dampers
• 4 x motor pluggable connectors