Brain FPV Radix LI Flight Controller 20x20

Brain FPV Radix LI Flight Controller 20x20

Product description

Brain FPV Radix LI Flight Controller 20x20

graphics
In addition to the normal Betaflight OSD, the RADIX LI on-screen display offers additional features that you will not find anywhere else. Show your pilot and team logo proudly with our logo customizer at the touch of a button. Additional features include a graphic barometer scale, artificial horizon, gyro-spectrograph, RC-stick display, 3D OSD support and much more!

features
There are MUCH MORE features than customizing your logo on the splash screen. Features that you can not do with the normal Betaflight OSD. You have heard of the graphical features of our OSD. But what exactly are they and how do I use them? Find out about all the cool features and how to turn them on: HOW TO PIMPT YOUR BRAINFPV OSD

stack
RADIX LI can be used with any 4-in-1 controller on the market. It comes with cables and plugs so you can easily make your own wiring harness. To make things even easier, we have a RADIX LI & Spedix IS25 4-in-1 combination that is truly plug and play capable.

Compared to the RADIX, the RADIX LI offers:
SMALLER
(duh): hole spacing 20 mm, outside dimensions 26.5 mm x 26.5 mm

HAS 5V CONTROLLER
Can be powered directly with a 3S - 6S LiPo battery (500mA BEC installed)

NO BARO
You can connect a GPS if you want to know how tall you are

NO MICRO SD SLOT
Who needs a black box if you can use the custom Brain FPV OSD spectrograph to adjust?

NO ANALOG RSSI INPUT
Using RSSI or LQ over an RC channel is more common and accurate anyway.

Technical specifications

• Processor: STM32F446RET6, Coretx-M4, 32 bit, 180 MHz, 128 kB RAM, 512 kB Flash.
• IMU: Bosch Sensortec BMI160 with 3.2 kHz and SPI connection.
• OSD: full graphic, automatic PAL / NTSC recognition, adjustable black and white level. Full Betaflight OSD support with additional graphics capabilities. Support for side-by-side 3D when used with a 3D FPV camera.
• Motor outputs: 6 outputs with full DSHOT (150/300/600/1200) and OneShot support.
• Receiver support: PPM, S.Bus (Inverter built-in), DSM, HoTT, SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver. The receiver is powered by USB for easy and secure setup.
• Telemetry support: FrSKY smart port, FrSKY sensor hub, HoTT telemetry, SRXL, CSRF, FPort capable. Built-in inverter for FrSKY telemetry.
• Serial ports: 4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry. Inverters are automatically enabled / disabled for maximum flexibility.
• RGB LEDs: Special RGB LED output.
• Camera Control: Special output for accessing the camera menu to change camera settings.
• Buzzer connection: Special connection for 5 V buzzer (max 100 mA).
• Analog inputs: Voltage detection (VBAT), current input (3.3 V max.).
• Power supply: 3S - 6S (7.5V - 26V), 500mA BEC
• Dimensions: 26.5 mm x 26.5 mm, hole spacing 20 mm. 4.1 mm holes for vibration dampers for M3 screws.
• Weight: 4g
• Gluten-free, GMO-free, inorganic free-range gyro :)