DJI Phantom 3 Part 12 Battery

DJI Phantom 3 Part 12 Battery

Product description

The new generation of Intelligent Flight DJI battery with 4480mAh and 15.2V LiPo4s was specially developed for the Phantom 3 Series to enable optimal performance. The battery provides up to 23 minutes of flight time, built-in sensors and four LEDs, which indicate the remaining power and the charge status in real time.

particularities

• Capacity for up to 23 minutes of flight time.
• Four LEDs indicate the remaining power and the state of charge.
• Power management is done internally - no compensation connector for charging is required.
• Intelligent loading and unloading functions to help protect your battery
• Withdrawable design for cable-free use - no cable connection required.
• Updated specifically for the Phantom 3 Series

Charge the battery

Batteries must be charged with a product approved by DJI adapter. DJI assumes no liability if the battery is charged with the charger from a third party. Let the battery during charging unattended. Holding the battery during charging of combustible materials and surfaces away (carpet, wood, etc.).

Charging the battery pack immediately after the operations. The battery is still too warm. Charging the battery only when it is cooled to room temperature. Charging the battery outside the temperature range of 0 ° C to 40 ° C, the battery may leak, overheat or be damaged.

After 20 charge cycles the battery is fully discharged and recharged once. Discharging the battery, remain or to less than 8% capacity, the battery can not be turned. then charging him completely. By this operation, the battery life can be extended.

battery storage

Discharge the battery completely, and dispose of it at a special collection point. Dispose of the battery in the trash. Follow strictly all local regulations for disposal and recycling of waste batteries.

If the power button on the Intelligent Flight Battery is inactive and not the battery can fully discharge it please contact a professional disposal or recycling center for batteries and accumulators.

Technical specifications

• Capacity: 4480mAh
• Chemical composition: Lithium Polymer
• Voltage: 15.2V

compatibility

• The battery is compatible with Phantom 3 Advanced, Phantom 3 Professional and Phantom 3 standard.