FETtec ESC 4in1 45A
28% discount
The article is no longer available.
- 64,90 € *
- 89,90 €
FETtec ESC 4in1 45A
Product description
FETtec ESC 4in1 45A
This ESC is made for top class FPV Racing. With its own closed-source firmware, a limitation to 45A and DSHOT2400 support, this ESC is an absolute must have for racers. Made in Germany.
Attention: When using with 6S batteries you MUST solder on suitable capacitors, otherwise there is a risk that the ESC will burn out.
Technical data
- Active limitation to 45A per motor
- Suitable batteries: 3S-6S
- High quality 40V MOSFETs
- STM32G071 @ 64MHz
- 128 kHz Motor PWM
- Full sine control
- Solder points for up to 5 additional capacitors
- KISS FC Passthrough
- Betaflight Passthrough (available from 4.1)
- Automatic input signal detection
- Dshot 300-2400
- PWM
- OneShot42/125
- OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)
- in development: Crossfire, SBUS
- 38 mm x 38 mm
- Mounting holes: 30.5mm x 30.5mm, M3 breakable for M4
Content
- FETtec ESC 4in1 6S 45A
- Capacitor 50V, ESC < 1ohm (477CKE050M)
- JST-SH 8 pin cable
| Order number | FTT-FET30 |
|---|---|
| EAN | 4270000738425 |
| Manufacturer | FETtec |
| Produktsicherheit | Hersteller: FETTEC UG Wiesenstr. 6, 57612 Hemmelzen, Deutschland E-Mail: service@fettec.net Verantwortliche Person: FETTEC UG Wiesenstr. 6, 57612 Hemmelzen, Deutschland |
