KISS ESC 2-5S 25A 32Bit

KISS ESC 2-5S 25A - 32Bit single

The KISS ESC25A powered by an M4 MCU is the latest member of the KISS family, designed for race copters with power hungry engines and propellers. Actively limited to 40A for long life, it offers the same features as its big brother, the KISS ESC32A.

Specifications

• 32-bit ARM Cortex M4 MCU @ 80 MHz
• Telemetry capability (voltage, current, temperature, speed)
• Overcurrent protection (measures the current and reduces it to max. 40A)
• Over-temperature protection (reduces the maximum output when hotter than 100 ° C)
• sinHybrid :: Sinwave / BackEMF hybrid commutation for smooth operation Dshot 2400 (Full resolution of 2000 steps takes only 6.5µs)
• Supports all common Dshot commands like TurtleMode, 3D mode and change of rotation.
• advanced adaptive auto-timing (6.5-30° feed at each commutation)
• For Race Multicopters (25A continuous even with weak cooling)
• High max. rpm (500.000ERpm, 71.400Rpm with a 14 pole motor)
• Small size (12.5 x 26 mm)
• Precise speed control (2000 steps with Dshot)
• For 3-5S. No additional capacitor is required.
• Very fast throttle response Linear throttle response Active freewheel (low diode losses)
• Regenerative braking
• Dshot 100-2400, Oneshot42, Oneshot125 and normal (25 - 500 Hz) PWM are detected automatically.
• Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE and multiplex SRXL as well as S-Port, HOTT, TBS CROSSFIRE and sensor bus
• Operating voltage 6 - 24V (2-5s)
• Maximum continuous current 25A Maximum current 40A, actively limited
• 600.000 ERPM maximum rotational field speed (up to 500000 recommended)
• 6 layers of 70µm copper which can be used almost exclusively for the power supply, because the logic part is on a separate board
• All inputs and outputs are protected against overvoltage (~30V) and undervoltage (~-30V). 3,3 and 5V capable
• Modern smart gate driver
• 396µF 25V ceramic capacitors onboard