FrSky Archer Plus R10+ 2.4GHz ACCESS Receiver OTA

FrSky Archer Plus R10+ 2.4GHz ACCESS Receiver OTA

Product description

FrSky Archer Plus R10+ 2.4GHz ACCESS Receiver OTA

The Archer line of receivers has been further enhanced with the new Archer Plus series.

The Archer Plus series receivers offer several new features. First, improved anti-RF interference capability can provide more solid RF performance, and this is in addition to the existing anti-interference performance in the spark ignition process. These Plus series receivers are also equipped with both ACCESS and ACCST D16 modes, in which the RF protocol is intelligently adjusted during the binding process on the radio. With the black box function, some basic flight data (such as power and signal) can be well preserved.

The R10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS or S.Port. The R10+ can be used as the primary receiver in a redundant solution by setting one port as SBUS In and connecting it to another FrSky receiver equipped with an SBUS Out port. Using the FBUS protocol, the Archer Plus series receivers can be seamlessly paired with multiple telemetry devices (XACT servos, ADV sensors, etc.), simplifying building setup. This receiver also supports full signal strength with two detachable antennas, ensuring optimal antenna reception and range.

Features

• Improved anti-RF interference capability with more solid RF performance
• Intelligently tuned ACCESS & ACCST D16 modes
• Supports basic black box functions
• 10 configurable channel ports* (PWM, SBUS, FBUS or S.Port)
• Supports signal redundancy (SBUS In)
• Full control range with telemetry (S.Port or FBUS)
• Anti-interference capability in spark ignition mode
• Over-The-Air (OTA) FW upgrade*
• External battery/device voltage detection

Specifications

• Dimensions: 46.5*26.3*14.7mm (L*W*H)
• Weight: 13g
• 10 configurable channel ports
• CP1: PWM / SBUS output / FBUS / S.Port / SBUS input
• CP2-10: PWM / SBUS output / FBUS / S.port
• SBUS Out (Supports 16CH / 24CH mode)
• Operating voltage range: 3.5 -10V
• Operating current: ＜100mA@5V
• Control Range: Full Range* with Telemetry
• (*Full range: ＞2km, range may vary depending on local conditions).
• Voltage measurement range via AIN2 (external device): 0-35V
• (Battery voltage divider ratio: 1:10)
• Compatibility: FrSky 2.4GHz ACCESS / ACCST D16 capable transmitters

Contents

• 1x FrSky Archer Plus R10+