iFlight Cidora SL5-E FPV Copter 4S PNP

iFlight Cidora SL5-E FPV Copter 4S PNP

Product description

iFlight Cidora SL5-E FPV Copter 4S PNP

Cidora SL5-E 4S 6S FPV Drone - BNF with our best iFlight components installed and preset! SL5 is a 5" tall BNF (bind-and-fly) quadcopter that comes fully equipped with everything you need to take off!

Various power versions (4S, 6S cell count) to meet the needs of most pilots. Choose your receiver option to get your FrySky or Crossfire installed and ready to be tied to your radio.

Technical Data FC

• MCU：STM32F405
• IMU：MPU6000
• Betaflight OSD：YES
• Blackbox：8MB
• 4X Uarts（1 2 3 6 )
• 8 x Dshot/Proshot/Oneshot
• 8 x individual ESC power/signal pads
• 1 x group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
• VTX Protocol: IRC Tramp
• Input: 2-6S (Max 8S)
• BEC: 5V/2.5A
• Firmware: betaflight_4.0.5_BETAFLIGHTF4.hex
• Mounting: 30.5*30.5mm，φ4mm with grommets φ3mm
• Size: 36*36mm
• Weight: 7.6g

Specifications ESC

• Size: 43x39mm
• Drill holes: 30.5x30.5mm / diameter 3mm
• Weight: 14.4g
• Voltage: 2-6S
• STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
• Current sensor: Yes
• Telemetry: Supported
• Support: DShot DShot150/300/600/1200/MultiShot/ OneShot
• ESC Target: G-H-30 BLS 16.7

Technical data VTX

• Tramp Telemetry
• Leistung: 25mW/200mW/400mW/800mW
• 48 channels including raceband
• Fast frequency lock
• Voltage and power consumption: 7V～28V，+12V/500mA@800mW
• Size: 36mmx36mmx8mm
• Drill holes: 4-M3
• Weight: 11g (without antenna)

Version: 4S LiPo

Receiver: PNP(No receiver)

Content

• Cidora SL5-E 4S 6S FPV Drone
• 2 sets Nazgul 5140 Propeller

GoPro NOT included