iFlight Green Hornet V3 FPV Cinewhoop 4S FrSky R-XSR

iFlight Green Hornet V3 FPV Cinewhoop 4S FrSky R-XSR

Product description

iFlight Green Hornet V3 FPV Cinewhoop 4S FrSky R-XSR

The iFlight Green Hornet V3 BNF offers an amazing flying experience with protection when you need some!

The entire frame has been kept to a minimum in size and weight to accommodate all of our best analog hardware inside.

But there's a lot more this time around. NEW motor size and NEW software engineered channels to increase performance and reduce noise. Yes, you heard me right! FINALLY a CineWhoop without that noise that wakes up the last sleeping dogs in the whole neighborhood.... .

No more broken PLA pipes! Brand new, lightweight polycarbonate duct for minimal disruption to duct thrust and efficiency.

Small space? Tight gaps? Indoor security? But you need the 4K? Well, here comes your GoPro!

You have that location you want to fly in, but there's no way you'd fly your standard props around you or your friends?

Just love the style and the fact that "props just don't break that often"? ... GO FOR IT!

Improvements from V2 to V3:

- XING X1408 (Unibell) 4S 3600KV / 6S 1507 2800KV
- SucceX-E mini F4 upgraded to SucceX-E mini F7
- Improved polycarbon ducts for less noise and more durability
- Upgraded EVA Protectors

Tips:

The VTX is set to 25mW by default! Power levels above 25mW require a HAM license or must be approved by local authorities! Please make sure you are flying on legal frequencies and use our prepared Betaflight VTX tables according to your region.

Features:

• No props or frames in sight!
• High performance SucceX-E mini F7 FC + 35A BLHeli_S 4 in 1 ESC + 300mW VTX
• T700 quality carbon (40% more tensile strength compared to standard 3K carbon)
• Lightweight, one-piece frame construction (less flex, stiffer, more durable)
• Low-resonance frame construction (less Jello, more Cinematic)
• Buttery smooth 4S XING-C 1408 3600KV
• Bumper prop guards to protect sensitive surroundings or self
• Pre-tuned with smooth freestyle settings

Technical Data

• FC Stack: SucceX-E mini F7 FC + 35A BLHeli_S 4 in 1 ESC + 300mW VTX
• Motor: XING-C 1408 4S 3600KV
• Camera: RunCam Nano2 2.1MM NTSC 4:3
• Motor to motor: 145mm
• Frame size: 111x93mm
• Thickness of bottom plate: 2,5 mm
• Thickness of top plate: 2 mm
• Distance between top and bottom plate: 27mm (aluminum pillar height 27mm)
• Propeller size: 3 inch
• Drill holes: 20x20mm, 30,5x30,5mm
• FPV camera distance: 14mm
• Weight: 280.1g (without battery)

Recommended battery: 4S 1300mAh / 4S 1550mAh

Receiver: FrSky R-XSR

Content

• Green Hornet
• 2 x 3040 3-blade propellers
• 2 x iFlight Lipo Strap