iFlight Nazgul Evoque F6X Nebula Pro Vista HD System FPV Copter 6S BNF

iFlight Nazgul Evoque F6X Nebula Pro Vista HD System FPV Copter 6S BNF

Product description

iFlight Nazgul Evoque F6X Nebula Pro Vista HD System FPV Copter 6S BNF

The secret to ultimate performance is passion

That was the tagline for our latest approach to creating this work of art! Fully protected electronics, fully lit, paired with the latest and greatest electronics we can offer. Months of development went into this BNF and all the lessons we learned before to ensure that both novice and experienced pilots can fully enjoy the new Nazgul Evoque from the first second.

Lightweight side panels - Keep your rig clean

Have you ever felt like a lawn mower in your early days, cutting through the grass and throwing wet grass over and into your flight stack? Well... Those days are over! The new side panels not only protect you from getting wet, but they also protect you from getting hit by small components of your flight controller.

Secured integrated XT60 battery connector - as safe as it gets

With the integrated XT60 connector on the back, you can safely connect your battery and route all cables away from the propellers.

Powerful electronics - F7 55A Power Stack

Our BLITZ Mini F7 TwinG flight controller with Gyro Fusion technology, modern USB Type-C connector, 32MB flash for any tuning session and 5 UARTs for any devices you want to use.

XING2 Performance Motors - The best motors get even better

7075 aluminum bell housing, 5mm titanium alloy, durable NSK bearings, center slotted magnets for better response and lower air gaps for higher magnetic flux with more power and efficiency. Not to mention XING's signature damping ring between the bell and bearing to increase durability and make your flights smoother.

Lighting - Let It Be Green

360-degree lighting for day and night. Perhaps the prettiest BNF on the market, but also the most practical. Bottom light shows battery voltage, quick check gives you an indication of remaining voltage; never take off with a dead battery again. Built-in LED wires in the side panels and bottom of the arms are also illuminated, adding style to your next nighttime race.

Specifications:

• Overall Dimensions: 255.4mm (Squashed X)
• Geometry: Squashed-X frame
• Distance from bottom to top: 28mm
• Arm thickness: 6mm
• Bottom plate thickness: 3mm
• Thickness of top plate: 3mm
• Thickness of top (middle) plate: 3mm
• XING2 2506 1500KV motors(Black color)
• HQ 6X2.5X3 tri-blade props
• Weight: 464.3g (without battery and GoPro mount)

FC // FLASH MINI F7

• BlackBox: 16MB
• DJI Air unit plug-and-play. No need to solder tiny wires
• BAT, +5V, 3.3, start indicator
• With LC filter

Specifications:

• MCU: STM32 F722
• Gyro：BMI270
• Baro: DPS310
• Betaflight OSD：IFLIGHT OSD （AT7456E)
• Blackbox：16MB
• 5 X Uarts
• UART1 for VTX HD/Analogue
• UART2 for receiver
• UART3、UART4 for GPS or other sensors which need serial port
• UART6 for ESC telemetry
• 4×Dshot/PWM outputs
• 1×I2C
• 1 xSH1.0 9pin connector for HD VTX/Analog VTX&CAM （5V/BAT/G/VO/T1/R1 /5V/G/VI）
• 1 xSH1.0 8pin connector for ESC（R6/CUR/M4/M3/M2/M1/BAT/G)
• 1xSH1.0 6pin connector for each receiver or DJI（3V3/R2i/5V /G/R2/T2）
• 1xSH1.0 4pin connector GPS (T4/R4/G/5V)
• 1xSH1.0 4Pin connector LED&Beeper (BUZ/LED/G/5V)

• Smartaudio&IRCTramp VTX protocol supported
• WS2812ledStrip：Yes
• Bepper：Yes
• Firmware: IFRC-BASEF4 4.X.X
• Mounting：20*20mm/φ4
• Dimensions：30.5*27mm
• Weight：5.0g

ESC // BLITZ Mini 55A

Specification:

• Dimension: 35*42mm
• Mounting holes: 20*20mm/Φ4mm
• Weight: 11.3g
• Supports 2-6S lipo input
• MCU：G071
• Constant: 55 Amps
• Burst: 60 Amps
• Current sensor: Yes
• BEC: No
• Current rate: 100
• Supported: DShot DShot150/300/600/MultiShot/ OneShot etc.
• Firmware: BLHeli 32
• Target: IFLIGHT_BLITZ_G1

Contents:

• 1 x Nazgul Evoque F6 (Squashed X)
• 4 x HQ 6X2.5X3 Tri-Blade props
• 2 sets of battery pads
• 1 x Battery strap
• 1 x Screw bag