ISDT SMART CHARGER K2 DUO - 200/500W, 20A, 2x6S Lipo, integrated power supply unit kaufen

Product description

ISDT SMART CHARGER K2 DUO - 200/500W, 20A, 2x6S Lipo, integrated power supply unit

Finally it is here, the successor of the D2 now also with the possibility to supply the charger via a DC voltage source.
The iSDT SMART CHARGER K2 DUO has a total charging power of 200W with the integrated power supply.
If it is supplied with DC voltage by a battery or a more powerful power supply, it is up to 2x 500W.
In parallel mode a battery can be charged with up to 800W.
The powerful 6S balancer with 1.5A balancer current per cell ensures rapid balancing even with larger battery packs.
The 2.8" IPS display ensures good readability, even in sunshine.
The USB-C port makes it easy to perform a software update or charge a USB device with 5V/2A via this port.

Technical data:

Input voltage: 110-240 volts - alternating current (AC) or 10-30V direct current (DC)

Input current max.: DC 35A

Charging power AC: 200W when operating with the internal power supply - the 200W are distributed between the two channels as required. e.g. charging power per channel: 100W/100W or 150W/50W or 200W/0W or 0W/200W

Charging power DC: when supplied with DC voltage - 500W per channel

Charging power parallel DC: if both channels are connected together via a parallel cable, a battery can be charged with up to 800W/35A.

Output voltage: DC 1-30V

Charging current per channel: 0,2-20A

Discharge power: 15W*2

Discharge current per channel: 0.2-1.5A

Discharge power in parallel: 30W/3A

Balancer current: 1500mA/cell

adjustable end of charge voltage: up to 4.35V for LiHV

Number of cells - battery type: 1-6 LiXX, 1-16 NiXX, 1-12 Pb

Plug-in system charging output XT60i

DC input connector system: XT60i

Connector system Balancer XH

Weight: 700 g

Dimensions: 142x135x64mm

Color display: 2.8" 320x240 IPS LCD, easy to read even in daylight and slanted viewing angle 178°.

updateable

multilingual menu navigation also possible in German

Explanation of the charging power when supplying the K2 with DC voltage:
The maximum input current is 35A. Thus, the total charging power of 1000W is only possible from 30V input voltage. This results in

at 12V: approx. 380W

at 24V: approx. 800W

at 28V: approx. 930W

Scope of delivery:
Charger with mains cable
Leaflet with safety instructions and link to detailed German manual as pdf