Junsi iCharger 308 Duo Charger 2x650W - 1300W

Junsi iCharger 308 Duo Charger 2x650W - 1300W

Product description

Junsi iCharger 308 Duo Charger 2x650W - 1300W

Compact 1300W charger with integrated balancer, USB port and card slot for Micro SD cards for logs.

Specifications

• Microprocessor controlled high performance fast charger/discharger and balancer
• Supported battery types: LiIo/LiPo/LiFe/NiZn, NiMH/NiCd, Pb
• Cell count: 1-8 LiIo/LiPo/LiFe/NiZn, 1-20 NiMH/NiCd, 1-15 Pb (2-30 V)
• Input voltage: DC 10-30 V
• Input current: < 60A, but both channels are limited to 40A each
• Charging power max.(asynchronous): 1300W - 2 x 650W from >23.5V (each output can handle max. 800W)
• Charging power max.(synchronous): 1300W from >23.5V
• Charging power at input voltage >23.5V: Max. 1300W
• Charging power at input voltage 12V: Max. 432W with only one output, 648W when using both outputs
• Charging current: 2 x 0.05 - 30A (asynchronous)
• Charging current: 0.05 - 50A (synchronous)
• Discharge power max.: 130W synchronous, 2 x 65W asynchronous (one output alone can handle max. 80W).
• Discharge current: -2 x 0.05 - 30A (asynchronous), 0.05 - 50A (synchronous)
• Regenerative discharge: up to 1300W asynchronous, 1300W synchronous (each output can max. 800W)
• Discharge with external load max.: 2100W 35V/30A (each output can max. 1050W)
• Balancer current: 1.2A per output and cell or 2.4A in synchronous mode
• Balance accuracy: <10mV
• automatic fan control - 2 fans
• USB port: 5V/1A (current limit at 1.2A)
• Micro SD slot to store logs and data
• Dimension: 171.2×117.8×58.8 ±0.5mm
• Weight: 0,91 kg

asynchronous means one battery pack per output
synchronous means 2 identical battery packs connected in parallel - both outputs are combined
regenerative discharging = current regeneration into a lead acid battery

further functions:
Internal resistance measurement of the cells
Servo test
Firmware update via USB connection possible.

Scope of delivery

• 1x Junsi iCharger 308 Duo
• 2x Balancerboard XH
• 2x Balancer cable 9 wire for Balancerboard XH
• 2x charging cable 2,5 mm² with banana plug
• 1x input cable 4 mm² to 5,5 mm connector
• Installation CD with software and manual in english
• printed german manual