Matek Systems Flight Controller F405-Wing

Matek Systems Flight Controller F405-Wing

Product description

Matek Systems Flight Controller F405-Wing

FC Specifications

• MCU: 168MHz STM32F405
• IMU: MPU6000 accelerometer / gyro (SPI)
• Baro: BMP280 (I2C)
• OSD: INAV OSD w / AT7456E chip
• Blackbox: MicroSD card slot (SD / SDHC)
• VCP & 6x UARTs
• 2x motors, 7x servo outputs
• 2x I2C
• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Red)
• Built in inverter for SBUS input (UART2-RX)
• PPM / UART Shared: UART2-RX
• Soft Serial on TX2 pad
• Battery Voltage Sensor: 1:10 (Scale 1100)
• WS2812 Led Strip: Yes
• Beeper: Yes
• RSSI: Yes
• FC firmware
• INAV Flight
• Target: MATEKF405SE
• PDB
• Input voltage range: 9 ~ 30V (3 ~ 6S LiPo) w / TVS protection
• 2x ESC power pads
• Current Senor: 104A, 3.3V ADC, Scale 317
• BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

• Continuous current: 2 amps, Max.3A
• BEC 9V / 12V output

Designed for Video Transmitter, Camera, Gimbal ect.

• Continuous current: 2 amps, Max.3A
• 12V option with jumper pad
• BEC Vx output

Designed for servos

• Voltage adjustable, 5V Default, 6V or 7.2V via jumper
• Continuous current: 5 amps, Max.6A
• Output ripple: 50mV (VIn = 24V, Vout = 5V @ 5A load)
• BEC 3.3V output

Designed for Baro / Compass module and Spectrum RX

• Linear regulator
• Continuous current: 500mA
• Physical

size

• Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
• Dimensions: 56 x 36 x 13 mm
• Weight: 25g