Multiplex POWER PEAK A4 EQ-LCD 230V / 12V Charger

After connecting the battery pack to the charger, the number of cells is detected automatically and thus the charge cut-off voltage is set. Operating errors in the cell count setting are thus almost impossible. The charging current can be set in a wide range of approx. 0.3 ... 3 A. Charging takes place according to the proven CC-CV procedure. The integrated equalizer automatically adjusts the voltage level of the individual cells during the charging process.
The charger has an optical LED charging indicator, which also indicates when the battery is 95% charged.

NC / NiMH-Mode:
Even with these types of batteries, the cell count is automatically detected. The charging current is set manually in the range of 0.3 ... 3A.
After the battery has been fully charged, the delta-peak automatic switch-off automatically switches off the charging process. The large LC segment display clearly displays the current voltage and charging current. The loaded capacity is also displayed.

The included power supply unit SPS 4A allows the charger to be operated on the 230 Volt mains, making it a universal and affordable 230 V AC and 12 V DC charger.

features

• load
• Automatic cell count detection
• Protection against reverse polarity at the charging output
• Acoustic and optical charging indicator

delivery

• 1 charger Power Peak A4 EQ-LCD
• 1 connecting cable DC 12 V
• 1 switching power supply 110 ... 230V - 4A (with Euro plug)