Multiplex POWER PEAK® C8 12V / 230V 180W

The clear and clear Display charging parameters or batteries Data on the bright mega LCD display with lights which likewise is located under the closed the user interface. The menu navigation is performed in 6 languages ??(English, German, French, Italian, Spanish and Czech) and be selected in software.
Particular attention was paid to a quiet fan with additional RPM and temperature control in order to use the device in the office and living areas without noise nuisance can.

With integral Equalizer for Lithium, LiPo and LiFe batteries and a high Equalizer current of 250 mA. After connecting the Lithium battery pack to the charger, the cell count and voltage of each individual cell to the charger. This feedback keeps the charger is always informed about the state of the cells and can react accordingly.
The charging current can be adjusted in a wide range of about 0.1 ... 10 A. In network mode, the device has a power output of 110 watts, thus suitable for small slow flyer -, transmitter and receiver batteries, and also for large surface and flight packs.

A powerful equalizer and high charge currents are important features for a fast battery charging.
An integrated USB port with bootloader function for a subsequent update of the software, the device keeps up to date.

Simple, secure operation and automatic storage of essential battery data in the robbe BID system (Battery Identification system).

The special advantages of the BID system:

• Simply plug the BID-Key into the charger plug in and start charging.
• No more searching the set-up parameters menu
• Maximum protection against incorrect operation
• Stores the essential battery data in the BID chip
• Of course, also load batteries without the BID system, the charger!
• One BID key is supplied with the charger.

features:

• Loading - Unloading - cycle 2 ... 99 x unload Laden
• Adjustment of discharge - charge current, battery type and cell count.
• Display of charge-discharge
• Display of charged and discharged capacity
• Display of charge, peak and input voltage
• Display of charged or discharged capacity values
• Display of individual cell voltages of Lithium batteries
• USB port with bootloader function

NC / NiMH batteries

• 1 ... 24 cells
• With digital Delta-Peak cut-off for NC- and NiMH batteries.

LiIo-, LiPo, LiFe batteries

• 1 ... 8 cells
• Cut off using the CC-CV-charge method

lead batteries

• 1 ... 12 cells (2 ... 24V)
• Cut off using the CC-CV-charge method

delivery

• 1 Power Peak C8 EQ-BID 230V / 12V (180W) Loaders
• 1 BID-Key
• 1 Equalizer Adapter JST XH (No. 8214) to connect 2 ... 6 S LiPo batteries with JST-H voltage sensor cables (Lama, G47, Align) the equalizer.