Tattu R-Line 650mAh 4S 95C XT30 LiPo Battery

Tattu R-Line 650mAh 4S 95C XT30 LiPo Battery

Product description

The Tattu R-Line 650mAh 4S 95C LiPo battery was specifically designed to meet the demanding requirements of FPV racing. With its high discharge rate, light weight, and compact design, it is ideal for lightweight, agile racing drones. Even during rapid acceleration and demanding flight maneuvers, the battery delivers the energy needed for powerful and reliable motor performance.

Tattu’s R-Line series is based on the proven technology of Toppilot competition batteries and is designed for ambitious FPV pilots. High-quality lithium-polymer cells and optimized stacking technology ensure high energy density, low internal resistance, and a stable voltage supply under load.

High discharge rate for demanding FPV races

With a continuous discharge rate of 95C and a short-term peak discharge rate of 190C, the Tattu R-Line offers sufficient power reserves for dynamic racing maneuvers. The rapid energy delivery supports direct throttle response and enables powerful acceleration, even under high drive demands.

Thanks to high-quality cell materials and meticulous manufacturing, the LiPo battery delivers efficient power output and generates comparatively little heat.

Compact, lightweight, and powerful

Weighing only about 72 g and measuring 59 x 31 x 23 mm, this flight battery can be easily integrated into smaller FPV copters. It is particularly well-suited for multirotor drones in the 100 to 180 size class, where every gram counts.

The 4S1P configuration with a nominal voltage of 14.8V offers a good balance of power and weight. The copter is powered via the XT30 main connector, while the separate balancer connector enables even charging of the individual cells.

Your benefits at a glance

• 650 mAh capacity in a compact design
• 95C discharge rate for high-performance demands in FPV racing
• Short-term peak discharge rate of 190C
• 4S1P configuration with a nominal voltage of 14.8V
• Weighs only approx. 72 g
• Optimized cell stacking technology for high energy density
• High-quality Japanese and Korean lithium-polymer raw materials
• Low internal resistance for stable power output
• Ideal for FPV multirotors in the 100–180 size class

Technical Specifications

• Manufacturer: Tattu
• Series: R-Line
• Product Type: LiPo Racing Battery
• Capacity: 650 mAh
• Configuration: 4S1P
• Nominal voltage: 14.8V
• Energy Capacity: 9.62 Wh
• Continuous discharge rate: 95C
• Maximum discharge rate (burst): 190C
• Weight: approx. 72 g
• Dimensions: approx. 59 x 31 x 23 mm
• Main connector: XT30
• Balancer connector: JST-PHR
• Recommended copter size: 100–180 mm

Usage Instructions

• A suitable 4S LiPo balance charger is required for charging. Observe the permissible charge and discharge currents and use the battery exclusively with compatible power systems.
• For extended storage periods, a cell voltage of approximately 3.8V is recommended. Do not continue to use damaged or swollen batteries. Always charge LiPo batteries under supervision and on a fire-resistant surface.