TBS WhitenoiseFPV Unify Crossfire mounting plate
TBS WhitenoiseFPV Unify Crossfire mounting plate
The TBS Whitenoise FPV Mounting Board was designed to integrate nano boards such as the Unify Nano or the Crossfire Nano clean into their copter. This PCB board is suitable for all small FrSky receivers such as the XM + and the TBS Crossfire Nano.
Once you have connected the Unify Nano VTx (video transmitter) to this board, the breakout pards on the edge of the PCB allow full control of your FPV video transmitter.
If your camera requires 5V input voltage, you can easily solder it to the PCB. After installing VTx (video transmitter), camera and receiver, your components will be fed with clean 5V.
There are even 2 solder pads on the board to solder the button of your Unify Nanos to the surface of the PCB. The button for the Unify Nano can then be soldered to the surface or practically on the side.
features
Important: If your receiver requires 3V, this board is not suitable for powering your receiver. You must then take this 3V from another power source
| Lieferumfang |
|
|---|---|
| Bestellnummer | TBS-WNFPV-MB |
| EAN | 0741587426523 |
| Hersteller | Team Blacksheep |
