BetaFPV Whoop Racing Cetus Kit

BetaFPV Whoop Racing Cetus Kit

Product description

Now everyone can fly! The eagerly awaited Cetus FPV Kit is here!

The best choice for beginners to explore the world of FPV drone flying. Cetus Brushed Quadcopter, LiteRadio2 SE transmitter, batteries, charger and VR02 FPV goggles - everything you need to get started is included.

The auxiliary flight function is particularly suitable for beginners. It allows you to safely gain your first FPV flying experience - including N-Mode (normal), S-Mode (sport) and M-Mode (manual). This satisfies the different needs of pilots and the flying experience can be adapted to different flying environments.

The kit is equipped with a Type-C port charging cable - a uniform charging connection for all parts. All parts are stored in a practical EVA storage bag, which provides better protection and is easy to carry.

Altitudehold function
The altitude hold function enables the Cetus quadcopter to hover automatically. The quadcopter can remain at the current altitude when the pilot's hands are removed from the transmitter. Accurate and stable positioning is achieved by a barometer/laser, which makes the quadcopter very stable in hovering flight. Flying has never been so easy for beginners.

Self-protection function
The Cetus quadcopter has an excellent self-protection function. It can perform an emergency landing if the pilot loses control or if the battery runs out. Now it's time to say goodbye to loss by crash!

3 flight modes, one key switch
Three modes, the N (normal)/ S (sport)/ M (manual), are available to suit different pilots' needs and adapt to different flying environments. Whether you are an experienced FPV pilot or a complete beginner, with the Cetus FPV Kit, anyone can fly confidently from day one. 3 flight modes can be switched with a self-service switch on the transmitter, easily and conveniently. In addition, these 3 modes all support 3 different speeds with SLOW/MID/FAST. The pilot can change it by SC switch on transmitter.

Self-developed LiteSilver system
The Cetus Brushed Quadcopter is equipped with a Lite 1S Pro FC, which utilizes the LiteSilver system and integrates Frsky D8, Rx 25mW VTX, barometer, laser and optical flow sensor. LiteSilver is a self-developed flight control system based on Silverware and the real-time operating system FreeRTOS.

Specification

• Positioning system: Optical flow / barometer / laser
• Altitude positioning: Laser / Barometer
• Angle positioning: Optical flow (effective altitude 0.3-3m)
• Auto-panning accuracy: Horizontal ±0.2m, vertical ±0.3m (under windless conditions)
• Receiver protocol: Frsky D8
• Flight controller: Lite 1S Pro brushed FC
• VTX: 25mW
• Camera tilt angle: 25°
• Camera: C02 FPV micro camera
• Transmitter: Literadio2 SE transmitter
• TX mode: Mode 2 (left stick throttle)
• FPV goggles: VR02 FPV goggles
• Motor: 716-19000KV brushed motor
• Propeller: 31mm 4-blade 0.8mm shaft
• Take-off weight: 35g (including battery)
• Drive system: 1S
• Battery: BT2.0 300mAh 1S battery (external)
• Flight time: 4-5min
• Flight distance: 80m (in open & undisturbed environment)

Contents

• 1x Cetus Brushed Quadcopter
• 1x LiteRadio2 SE transmitter (Frsky D8 protocol)
• 1x VR02 FPV goggles
• 2x BT2.0 300mAh 1S Lipo battery
• 1x BT2.0 battery charger and voltage tester
• 1x USB charging cable (Type-C)
• 1x Type-C adapter
• 1x tool for removing the propellers (prop tool)
• 4x 31mm 4-blade propellers
• 2x user manuals
• 1x storage bag