FrSky S8R receiver with 3-axis stabilization 8 channel and telemetry

FrSky S8R receiver with 3-axis stabilization 8 channel and telemetry

Product description

The S8R is a FrSky receiver from the S series with integrated 3-axis stabilization. For conventional fixed wing and glider models it supports stabilisation, automatic level, hover and knife-edge flight modes. For Delta Wings or Flying Wings and V-Tail models it supports stabilization and automatic level flight modes. You can select the model type and edit all these functions via S8R.Config or S8R.lua. The S8R can also be used as a standard 8-channel X-Series receiver if required. The FrSky S8R receiver is the ideal alternative to the popular X8R RC receiver if you need a flight controller with three axis gyro and accelerometer.

Tip for beginners: Use the S8R with 3-axis stabilization as a slave receiver with the RB-10 to give you additional safety to land your model aircraft safely.

-Built-in RSSI PWM output 0-3.3V
-Integrated battery voltage sensor
-Integrated 3 axis gyro sensor and 3 axis acceleration sensor
-Smart Port enabled
-SBUS Port enabled

The S8R receiver is compatible with:
FrSky Taranis X9D Plus
FrSky X9E
FrSky X7
FrSky Horus X12S
FrSky XJT (EU version) in D16
mode (not compatible with internal RF module D16HV2)

Dimensions 46,47mm x 26,78mm x 14,12mm
Weight 14g
Operating voltage 4 to 10 Volt Current consumption
at 5 Volt 120mA 8
channels via conventional servo connections and 16 channels via SBUS RSSI PWM output on board: PWm voltage 0 to 3.3 Volt, 100Hz, 1500±500us Gyroscope
Measurement Range: ±2000dps Accelerometer
Measurement Range: ±4g