TBS Unify Pro HV High Voltage 5.8 GHz FPV Transmitter RP-SMA

TBS Unify Pro HV High Voltage 5.8 GHz FPV Transmitter RP-SMA

Product description

TBS Unify Pro 5G8 HV (RP-SMA)

The Unify Pro now also comes in the HV (High-Voltage) version. Unlike its predecessor, this one can be powered with 7.4- 25.2V. In addition, the Unify Pro HV has a pluggable pigtail and a 5V power source for the FPV camera.

Furthermore, the Unify Pro HV offers many other features such as the "Cleanswitch", "Pitmode" and the "Smart Audio".

Cleanswitch allows clean switching and power on without interference on adjacent frequencies.

Pitmode allows you to check your FPV camera or video settings during a race without disturbing the race, because the VTX transmits at such a low power level that it stops after a few meters.

The Smartaudio technology allows you to set your channels, bands, etc. using the radio and the OSD. This works by assigning a UART to the audio channel on the flight controller.

Specifications

• Input voltage: 7,4 - 25,2 V
• Power consumption: 600mA
• Video input impedance: 75 Ohm
• Antenna connector: RP-SMA (VTX with pin)
• Weight: 5gr (with pigtail- without antenna)
• Channels: 40
• Bands: A, B, E, F, R

* In Germany a maximum of 25mW transmit power and only certain frequencies are allowed. Therefore the transmitter is delivered with 25mW and 24 channels (5733MHz - 5866MHz) - For unlocking an extra procedure is necessary.