Matek FCHUB-12S X-Class with Curr 440A 5V and 12V

Matek FCHUB-12S X-Class with Curr 440A 5V and 12V

Product description

Matek FCHUB-12S with Curr 440A 5V and 12V

PDB

• Input voltage range: 8~60V (3~12S LiPo)
• 4x70A cont, 4x110A Burst
• 4x ESC power / signal / telemetry pads
• Current sensor: 440A, 3.3V ADC, scale 75
• 2x LED displays for 5V, 12V

FFC connection

• Compatible with MATEKSYS FC F405-STD, F722-STD
• VTX: Video transmitter signal
• T5 & R5: TX5 and RX5 from F405-STD/F722-STD

BEC 5V output (5V pad)

• Voltage: 5.0 +/- 0.1VDC
• Continuous current 5 Ampere, Max.6A
• Short circuit tolerant (2 seconds)
• Overcurrent protection & self-recovery

BEC 12V output (12V pad)

• Voltage: 12.0 +/- 0.2VDC (input voltage >=12V)
• Continuous current 4 Ampere, Max.5A
• Input voltage <12V, output voltage = input voltage
• There will probably be an audible tone in the BEC12V inductor when the input voltage is below 12V
• Short circuit tolerant (2 seconds)
• Overcurrent protection & self-recovery

Switchable 12V output (SW12V pad)

• 12V ON/OFF can be switched via PINIO
• can be used to supply VTX, LED etc.

BEC 3.3V output

• Linear regulator
• Continuous current: 500mA

Dimensions and weight

• Mounting: 30.5 x 30.5 mm, Φ3mm
• Dimensions: 55 x 50 x 6 mm
• Weight: 21g