Matek Flight Controller H743-WING Wing FC

Matek Flight Controller H743-WING Wing FC

Product description

Matek Flight Controller H743-WING Wing FC

Technical data

• Mounting: 30,5 x 30,5 mm, diameter 4mm with grommets diameter 3mm
• Dimensions: 54 x 36 x 13 mm
• Weight: 30g with USB extension

Technical data FC

• MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
• IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
• Baro: Infineon DPS310 (I2C2)
• OSD: AT7456E (SPI2)
• Black box: MicroSD card slot (SDIO)
• 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
• 13x PWM outputs (including "LED" pad)
• 2x I2C
• 1x CAN
• 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
• 3x LEDs for FC STATUS (blue, red) and 3.3V display (red)
• 1x SPI3 breakout
• USB/Beep-Extender with Type-C(USB2.0)
• Switch for two camera inputs
• 5V/9V(12V) for camera/VTX power switch
• High-precision current measurement
• Voltage divider ADC VB2: 1K:10K
• ADC AirSpeed voltage divider: 10K:10K
• INAV TR/SA VTX control: Yes
• Beeper : Yes
• RSSI: Yes
• Analogue airspeed sensor: Yes
• Digital air speed sensor: Yes
• Static power 160mA@5V
• Compatible FC Firmware: ArduPilot(ChiBiOS): MATEKH743 | INAV: MATEKH743 (To be supported soon) | BetaFlight: MATEKH743

Technical data PDB

• Input voltage range: 9~36V (3~8S LiPo) with TVS protection
• 2x ESC power pads
• Battery voltage sensor: 1:10 (scale 1100 for INAV, BATT_VOLT_MULT 11.0 for ArduPilot)
• Current sensor: 132A, 3.3V ADC (scale 250 for INAV, 40 A/V for ArduPilot)
• Measuring resistor: 60A continuous, 132A burst.

BEC 5V Output

• Designed for flight controller, receiver, OSD, camera, buzzer, 2812 LED_Strip, buzzer, GPS module, AirSpeed
• Continuous current: 2 amperes, Max.3A

BEC 9V / 12V output

• Designed for video transmitter, camera, gimbal camera suspension etc.
• Continuous current: 2 Ampere, Max.3A
• 12V option with jumper pad

BEC Vx Output

• Designed for servos
• Voltage adjustable, 5V standard, 6V or 7.2V via jumper
• Continuous current: 8 Ampere, Max.10A

BEC 3V Output

• Linear regulator
• Continuous current: 200mA

Content

• 1x H743 Wing FC
• 1x USB (Type C)/beep (passive buzzer) extender
• 1x 20cm SH-4P to GH-4P cable for CAN connection
• 1x 20cm SH-6P to SH-6P cable for USB extension.
• Dupont 2,54 pins (board is delivered unsoldered)