Patrick Wichmann
stabiler Tiny Whoop, gut Flugeigenschaften, leicht zu konfigurieren und durch TBS Crossfire extrem gute Verbindungseigenschaften.
BETAFPV 75X OSD Tiny Whoop Drone Brushless XT30 TBS Crossfire 3s
BETAFPV 75X OSD Tiny Whoop Drone Brushless XT30 Crossfire 3S
This is a new era for whoop drones. 3S Whoop drone can fly real acro like a bigger quad, but is still small enough, safe enough and quiet enough to choose its own flying sites. No matter if house, garden, sports field - everything is possible. Beta75X and Beta65X. X stands for "eXtreme".
With the powerful STM32F405 processor FC boards and the tuned firmware of Betaflight Ominibus 3.5.0, anyone could fly the Beta75X drone like a racing professional. The frame is robust and light enough for the Beta75X. A total weight of 57.4 g gives the pilot a good balance and a nice hit on the 3S battery. You get a finished drone, no soldering or tinkering necessary. Adapted lightest 1103 8000KV engines with cable connectors. Just plug it in and off you go.
A 350mAh 3S high capacity battery is recommended as standard. However, the pilot could also use his whoop batteries with a replaced power cable. Optional and affordable.
Technical data
Flight Controller Data
ESC SPECIFICATIONS
PROPS OUT
The Beta75X drone is supplied as standard with "propellers and protection". Even during the hardest turns there is no more diving.
POWER CABLE
There are two options for the Beta75X battery. For best performance we recommend a 2S 350mAh battery with XT30 connector. If you already own many 1S hoop style batteries and want to use them with the Beta75X drone, we also offer a PH 2.0 option. The two 300mAh Lipo HV 1S batteries can be inserted into the slot by using an adapter.
FAQ
1st update for the LED on the rear panel for Beta75X The FC
card is now updated to V1.2. It can support programmable LED like WS2812 etc. The LED holder is currently designed on the 75X frame.
Note: There is NO rear LED holder for Beta65X by default.
2. I am interested in connecting a HD camera and a DVR, but I do not want to overload the 5V circuit.
The 5V regulator on the FC board can handle 2A of the load. So you can use it for HD cameras or DVR boards. More details can be found on the FC board page.
3. Does this drone have a current sensor?
This drone has a real current sensor. In order to be able to use this, some configurations are necessary in Betaflight.
4. Cli Dump for different versions of the 2-4S Whoop can be found on the Betaflight website
Have fun flying with the BetaFPV Tiny Whoop FPV drone
| Bestellnummer | BET-00313359-CRS |
|---|---|
| EAN | 0724779301082 |
| Hersteller | BetaFPV |
