FrSky S8R receiver m. 3-axis stabilization 8 channel and telemetry

FrSky S8R receiver m. 3-axis stabilization 8 channel and telemetry

Product description

The S8R is a S-Series FrSky receiver with integrated 3-axis stabilization. For conventional fixed wing and glider models it supports stabilization, automatic level, hover and Knife-Edge flight modes. For Delta Wings or Flying Wings and V-Tail models it supports stabilization and automatic level flight modes. You can choose the model type and edit all these functions via S8R.Config or S8R.lua. The S8R can also be used as a standard receiver for 8 X Series channels, if required. The FrSky S8R receiver is the ideal alternative to the popular X8R RC receiver if you need a flight controller with three axis gyro and accelerometer.

Tip for starters: Use the S8R with 3-axis stabilization as a slave receiver with the RB-10, to give you extra security to land your flight model again.

-Built-in RSSI PWM output 0-3,3V
Integrated battery voltage sensor
Integrated 3 axis gyro sensor and 3 axis accelerometer sensor
-Smart port enabled
-SBUS port enabled

The S8R receiver is compatible with:
FrSky Taranis X9D Plus
FrSky X9E
FrSky X7
FrSky Horus X12S
FrSky XJT (EU version) in D16 mode
(Not compatible with internal HF module D16HV2)

Dimensions 46.47mm x 26.78mm x 14.12mm
Weight 14g
Operating voltage 4 to 10 volts
Current consumption at 5 volts 120mA
8 channels via conventional servo connections and 16 channels via SBUS
RSSI PWM output on board: PWM voltage 0 to 3.3 volts, 100Hz, 1500 ± 500us
Gyroscope Measurement Range: ± 2000dps
Accelerometer Measurement Range: ± 4g