GEPRC TAKER F405 BLS 60A V2 Stack

GEPRC TAKER F405 BLS 60A V2 Stack

Product description

The GEPRC Taker F405 BLS 60A V2 Stack is a powerful combination of flight controller and 4-in-1 ESC designed specifically for FPV drones. With the F405 controller, this stack provides stable and responsive flight control, while the 60A ESC ensures impressive power handling and reliability. This combination is ideal for high-performance setups and enables a smooth flight experience, even during demanding maneuvers and fast flight sequences.

Highlights

1. Use of the mainstream STM32F405 chip
2. Equipped with the latest 42688-P gyroscope
3. 16M black box memory
4. Integrated LC filter
5. Upgrade Type-C USB interface
6. Plugs directly into the DJI Air Unit
7. With TAKER H60_BLS 60A 4IN1 ESC, the flight feeling is silky
8. Simple and reasonable installation method, the shock absorber can make the gyroscope work very stable
9. 12V@2.5A + 5V@3A dual independent BEC

Specifications

GEP-F405-HD V3 flight controller

• MCU：STM32F405
• IMU：ICM42688-P(SPI)
• Air Unit connector：Plug directly into DJI Air Unit
• Black Box：16M on board
• Barometer: BMP280
• Motor outputs：M1-M6
• USB interface：Type-C
• OSD：BetaFlight OSD with AT7456E chip
• BEC：5V@3A,12V@2.5A Double BEC
• Firmware target：GEPRCF405
• Mounting: 30.5×30.5mm，φ4mm hole will be φ3mm after using a shock-absorbing silicone circle
• Input voltage：3-6S LiPo
• UART：6 UARTs
• Power filter：Integrated LC filter
• Weight：7.3g

TAKER H60_BLS 60A 4IN1 ESC

• Input voltage: 3-6S Lipo
• Ammeter: Support
• Continuous current：60A
• Burst current：65A（5 second）
• Supports protocol: Dshot 150/300/600
• Size：42×45.7mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the shock-absorbing silicone ring.
• Weight: 14.9g
• Target: B_X_30