TBS Powercube Colibri Race FC 2.0

TBS Powercube Colibri Race FC 2.0 - Thumbnail 3

TBS Powercube Colibri Race FC 2.0 - Thumbnail 4

The article is no longer available.

1 review

34,90 € *

to the product description Question regarding the article?

Product description

TBS POWERCUBE FC - COLIBRI RACE 2.0

STM32 F3 based flight controller for the TBS PowerCube.

FEATURES:

STM32F303-based chipset for ultimate performance
MPU6000 SPI IMU with 8 kHz
PPM, SBUS, DSM, DSMX input (5 V and 3.3 V via internal BUS)
6 PWM ESC output channels (Autoconnect, internal BUS)
Choose between Plug & Play sockets or solder pads for remote control and buzzer
36 x 36 mm standard size (30.5 mm standard grid)
RGB LED Strip support including power management
Extension connector for GPS / external compass / pressure sensor
UART connector for peripheral devices (black box, FrSky telemetry etc.)
5V Buzzer Output
MPU6000 accelerometer / gyro of the new generation
Runs Betaflight, Cleanflight and Baseflight
4x status LED (DCDC 5 V pwr / 3.3 V pwr / status / 4.7 V pwr)
Weight: 4,4 g

NEW IN V2.0:

PWM pads for external ESC support
Stronger protection diode
Resettable fuse to protect parts that are burned in the event of a short circuit at 3.3 V
Additional 4.7 V operation LED
New IMU supply rail for superior low noise performance
MPU6000 instead of MPU6500 for better performance and less system noise

* The current Colibri requires a quick fix to be used with older Powercube PDBs (not V2.0). Click here for instructions.

scope of delivery	1x TBS Powercube Flugsteuerung 4x Schwarze Überwurfmutter
Order number	TBS-CUBE-FC
EAN	0741587428039
Manufacturer	Team Blacksheep
Produktsicherheit	Hersteller: TBS Avionics Co Ltd 11/K Wing Shan Industrial Building, 428 Cha Kwo Ling Road, Yau Tong, Kowloon, Hong Kong E-Mail: helpdesk.tbs@gmail.com Verantwortliche Person: meilon GmbH Konrad Zuse Ring 31 53424 Remagen Deutschland E-Mail: support@meilon.de Tel.: +49 (0)2642 / 40 52 88 0

1 Customer opinions

5.00

Jan 2018

Oliver Michael

Schnelle Lieferung. FC ist für den TBS Vendetta und funktioniert einwandfrei. Einbau war wegen dem Cube etwas kniffelig, aber nach ein bisschen Bastelei verlief alles sehr gut.